Video, Tv, and Radio for Linux (v4l) 2000

• Thread Index

• TUNER_LG_NTSC_NEW_TAPC on FV3K, what to do? - was Re: saa7134/Fly Video 3000 problems
  • From: hermann pitton <hermann.pitton@xxxxxx>
• RE: Poor performance under linux
  • From: "Alok" <alok@xxxxxxxxxxxxx>
• Re: streamer problems (was:Re: bttv+scsi writing)
  • From: Damjan Bole <damjan.bole@xxxxxxxxxxxxxxxx>
• Re: streamer problems (was:Re: bttv+scsi writing)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: Poor performance under linux
  • From: Alexandre Strube <surak@xxxxxxxxxxxx>
• Re: Re: Re: Prolink pixelview PV-BT878P+, rev 2E
  • From: Andrew Pilley <ashridah@xxxxxxxxxxxxxxx>
• BT878 PCI usage
  • From: Neil Radisch <nradisch@xxxxxxxxxxxxx>
• Re: Requesting advice on tuners.
  • From: Damjan Bole <damjan.bole@xxxxxxxxxxxxxxxx>
• Re: Requesting advice on tuners.
  • From: John Turnbull <johnrt@xxxxxxxxxx>
• Re: Requesting advice on tuners.
  • From: Damjan Bole <damjan.bole@xxxxxxxxxxxxxxxx>
• Re: saa7134/Fly Video 3000 problems
  • From: Jason Miller <jason@xxxxxxxxxxxxxxxxxxx>
• Requesting advice on tuners.
  • From: John Turnbull <johnrt@xxxxxxxxxx>
• Re: saa7134/Fly Video 3000 problems
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: problems with AverMedia Stereo
  • From: "Robert W. Fuller" <microbus@xxxxxxxxxxx>
• Re: saa7134/Fly Video 3000 problems
  • From: Jason Miller <jason@xxxxxxxxxxxxxxxxxxx>
• Re: problems with AverMedia Stereo
  • From: "Robert W. Fuller" <microbus@xxxxxxxxxxx>
• Problem with xawtv
  • From: Sum Yip <sumdiyan@xxxxxxxxx>
• Re: Device or resource busy
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: Device or resource busy
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: Device or resource busy
  • From: Matthew Tidy <tidmatau@xxxxxxxxxxxx>
• Hauppage WinTV PCI Problems
  • From: Johan Celén <johan.celen@xxxxxxxxx>
• Poor performance under linux
  • From: "Alok" <alok@xxxxxxxxxxxxx>
• Re: Device or resource busy
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: Device or resource busy
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: Re: Re: Prolink pixelview PV-BT878P+, rev 2E
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Device or resource busy
  • From: Matthew Tidy <tidmatau@xxxxxxxxxxxx>
• Re: Hard lockup with xawtv -triggered by heavy disk I/O
  • From: Damjan Bole <damjan.bole@xxxxxxxxxxxxxxxx>
• Re: Re: Prolink pixelview PV-BT878P+, rev 2E
  • From: Andrew Pilley <ashridah@xxxxxxxxxxxxxxx>
• Sandro Wefel and the linux grabber and yuv420p to 411 conversion method
  • From: "sting sting" <zstingx@xxxxxxxxxxx>
• Re: Prolink pixelview PV-BT878P+, rev 2E
  • From: Markku Tavasti <tavasti@xxxxxx>
• Re: Re: Prolink pixelview PV-BT878P+, rev 2E
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: Prolink pixelview PV-BT878P+, rev 2E
  • From: Andrew Pilley <ashridah@xxxxxxxxxxxxxxx>
• Re: Prolink pixelview PV-BT878P+, rev 2E
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• saa7134/Fly Video 3000 problems
  • From: Jason Miller <jason@xxxxxxxxxxxxxxxxxxx>
• AT&T Truevision TARGA support under v4l?
  • From: "Paul W. Morehead" <paulm53@xxxxxxxxxxxxx>
• about installing saa7134 driver for xawtv
  • From: Sum Yip <sumdiyan@xxxxxxxxx>
• Hard lockup with xawtv -triggered by heavy disk I/O
  • From: Damjan Bole <damjan.bole@xxxxxxxxxxxxxxxx>
• xawtv audio only
  • From: Bryan Koschmann - GKT <gktnews@xxxxxxxxxx>
• Prolink pixelview PV-BT878P+, rev 2E
  • From: Andrew Pilley <ashridah@xxxxxxxxxxxxxxx>
• bt878 (Hauppauge) question
  • From: Neil Radisch <nradisch@xxxxxxxxxxxxx>
• Spirit SCP 1000
  • From: Darryl Barlow <darrylb@xxxxxxxxxxxxxx>
• Re: saa7134 stability
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: saa7134 stability
  • From: hermann pitton <hermann.pitton@xxxxxx>
• logitech 4000 (formerly a "philips" webcam ) and video4linux 2
  • From: "sting sting" <zstingx@xxxxxxxxxxx>
• Re: saa7134 stability
  • From: Tim Connors <tconnors@xxxxxxxxxxxxxxxxx>
• No S-Video Capture on Osprey 230
  • From: "Sam Liston" <stliston@xxxxxxxxxxxxx>
• Re: saa7134 stability
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Refresh of Osprey patches
  • From: "Scott Tillman" <tillman@xxxxxxxxxxxxxxx>
• Re: Cinelerra mess
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: saa7134 stability
  • From: Tim Connors <tconnors@xxxxxxxxxxxxxxxxx>
• Save Frames
  • From: schnatte@xxxxxxx
• OT: 2.6.0-test3 & matroxfb - howto?
  • From: Vladimir Kushnir <vkushnir@xxxxxxxxxxx>
• RE: driver writing sample/guide?
  • From: "Roger Yung" <rogeryung@xxxxxxxxxx>
• driver writing sample/guide?
  • From: Ben Wu <bwu@xxxxxxxxxxxx>
• Re: saa7134 stability
  • From: hermann pitton <hermann.pitton@xxxxxx>
• RE: oops with osprey 230
  • From: "Scott Tillman" <tillman@xxxxxxxxxxxxxxx>
• Re: v4l : grabbing with RGB24 palette and display with XPutImage
  • From: alsa@xxxxxxxxxxxx
• Re: oops with osprey 230
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: guidance needed on vfd->release and proc/sysfs changes in 2.6 v4l
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• v4l : grabbing with RGB24 palette and display with XPutImage
  • From: "sting sting" <zstingx@xxxxxxxxxxx>
• Re: Cinelerra mess
  • From: Steve Tell <tell@xxxxxxxxxxxxxxx>
• Re: saa7134 stability
  • From: Bill Eldridge <bill@xxxxxxx>
• Re: saa7134-20030806 snapshot fails to load
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: saa7134 stability
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: saa7134 stability
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: [2.6-test3] bttv driver doesn't run
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: drop lircd!
  • From: Johannes Stezenbach <js@xxxxxxxxxxxxxx>
• Re: [2.6-test3] bttv driver doesn't run
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: Cinelerra mess
  • From: Wieslaw Kierbedz <sprawki@xxxxx>
• streamer problems (was:Re: bttv+scsi writing)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: saa7134-20030806 snapshot fails to load
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• guidance needed on vfd->release and proc/sysfs changes in 2.6 v4l
  • From: Duncan Haldane <f.duncan.m.haldane@xxxxxxxxxxxxxxxx>
• Re: saa7134 stability
  • From: Bill Eldridge <bill@xxxxxxx>
• Re: Cinelerra mess
  • From: Marvin Dickens <mpdickens@xxxxxxxxxx>
• Cinelerra mess
  • From: Dan Green <donutcop50@xxxxxxxxxxxx>
• Re: saa7134 stability
  • From: Jason Miller <jason@xxxxxxxxxxxxxxxxxxx>
• Re: saa7134 stability
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: v4l2 and 2.6.0-test3
  • From: Wieslaw Kierbedz <sprawki@xxxxx>
• Re: v4l2 and 2.6.0-test3
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• v4l2 and 2.6.0-test3
  • From: Jason Miller <jason@xxxxxxxxxxxxxxxxxxx>
• RE: How to capture frames from all 4 AV inputs on a Bt878 chipset card?(fwd)
  • From: "Ryan Ayers" <rayers.list@xxxxxxxxxx>
• Re: saa7134 stability
  • From: Jindrich Makovicka <makovick@xxxxxxxxxxxxxxxxxxxx>
• Re: Device or resource busy error using bttv-0.9.11
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: saa7134 stability
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: saa7134 stability
  • From: Wieslaw Kierbedz <sprawki@xxxxx>
• Re: saa7134 stability
  • From: Jindrich Makovicka <makovick@xxxxxxxxxxxxxxxxxxxx>
• Re: saa7134 stability
  • From: Bill Eldridge <bill@xxxxxxx>
• Re: saa7134 stability
  • From: Jason Miller <jason@xxxxxxxxxxxxxxxxxxx>
• Re: saa7134 stability
  • From: Wieslaw Kierbedz <sprawki@xxxxx>
• Re: saa7134 stability
  • From: Jindrich Makovicka <makovick@xxxxxxxxxxxxxxxxxxxx>
• saa7134 stability
  • From: Jason Miller <jason@xxxxxxxxxxxxxxxxxxx>
• Re: Re: Device or resource busy error using bttv-0.9.11
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: Hauppauge WinTV PVR - No Sound
  • From: Roger Oberholtzer <roger@xxxxxx>
• Re: Device or resource busy error using bttv-0.9.11
  • From: Bill Eldridge <bill@xxxxxxx>
• Re: Hauppauge WinTV PVR - No Sound
  • From: alsa@xxxxxxxxxxxx
• Re: Device or resource busy error using bttv-0.9.11
  • From: Tom Zoerner <tomzo@xxxxxxxxxx>
• Video4Linux with videofile as source
  • From: Andreas Volz <andreas@xxxxxxxxxxxxx>
• Re: Device or resource busy error using bttv-0.9.11
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: Re: Device or resource busy error using bttv-0.9.11
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: Hauppauge WinTV PVR - No Sound
  • From: Jason Miller <jason@xxxxxxxxxxxxxxxxxxx>
• Re: Hauppauge WinTV PVR - No Sound
  • From: Steve Tell <tell@xxxxxxxxxxxxxxx>
• Re: How to capture frames from all 4 AV inputs on a Bt878 chipset card?(fwd)
  • From: Alexandre Strube <surak@xxxxxxxxxxxx>
• Re: How to capture frames from all 4 AV inputs on a Bt878 chipset card?(fwd)
  • From: Lamar Owen <lowen@xxxxxxxx>
• Re: Device or resource busy error using bttv-0.9.11
  • From: hermann pitton <hermann.pitton@xxxxxx>
• saa7134-20030806 snapshot fails to load
  • From: hermann pitton <hermann.pitton@xxxxxx>
• RE: How to capture frames from all 4 AV inputs on a Bt878 chipset card?(fwd)
  • From: "Curi Fabio Eduardo (SFL)" <curif@xxxxxxxxxxxxxxxxx>
• Re: bttv 0.7.X crashes AMD Duron machines?
  • From: "Michael O'Keefe" <mokeefe@xxxxxxxxxxxx>
• Re: How to capture frames from all 4 AV inputs on a Bt878 chipset card?(fwd)
  • From: Alexandre Strube <surak@xxxxxxxxxxxx>
• Re: How to capture frames from all 4 AV inputs on a Bt878 chipset card?(fwd)
  • From: Jindrich Makovicka <makovick@xxxxxxxxxxxxxxxxxxxx>
• re: How to capture frames from all 4 AV inputs on a Bt878 chipset card?(fwd)
  • From: Alexandre Strube <surak@xxxxxxxxxxxx>
• Re: drop lircd!
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: drop lircd!
  • From: Johannes Stezenbach <js@xxxxxxxxxxxxxx>
• Kernel crashes when doing video capture...
  • From: Sitsofe Wheeler <sits@xxxxxxxxxxxx>
• Re: Hauppauge WinTV PVR - No Sound
  • From: Roger Oberholtzer <roger@xxxxxx>
• MythTV-- ioctl: VIDIOCSPICT (brightness=32768;hue=32768;...)
  • From: "Robert Liguori" <liguorir@xxxxxxxxxxxxxxxxxxxx>
• xawtv -- ioctl: VIDIOCSPICT (brightness=32768;hue=32768;...)
  • From: "Robert Liguori" <liguorir@xxxxxxxxxxxxxxxxxxxx>
• Re: Hauppauge WinTV PVR - ( Sound !!! )
  • From: "Robert Liguori" <liguorir@xxxxxxxxxxxxxxxxxxxx>
• Re: Hauppauge WinTV PVR - No Sound
  • From: "Robert Liguori" <liguorir@xxxxxxxxxxxxxxxxxxxx>
• Re: Hauppauge WinTV PVR - No Sound
  • From: "Robert Liguori" <liguorir@xxxxxxxxxxxxxxxxxxxx>
• Re: Hauppauge WinTV PVR - No Sound
  • From: "Robert Liguori" <liguorir@xxxxxxxxxxxxxxxxxxxx>
• Re: Hauppauge WinTV PVR - No Sound
  • From: Torgeir Veimo <torgeir@xxxxxxxxx>
• Hauppauge WinTV PVR - No Sound
  • From: "Robert Liguori" <liguorir@xxxxxxxxxxxxxxxxxxxx>
• video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
  • From: Tucker <tucker@xxxxxxxxxxxxxxx>
• Re: drop lircd!
  • From: Michael Uman <muman@xxxxxxxxxxxxxxxxx>
• bttv 0.7.X crashes AMD Duron machines?
  • From: Markku Tavasti <tavasti@xxxxxx>
• Re: drop lircd!
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Device or resource busy error using bttv-0.9.11
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: drop lircd!
  • From: Johannes Stezenbach <js@xxxxxxxxxxxxxx>
• drop lircd!
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• [patch] bilangual support for Xvideo
  • From: Johannes Stezenbach <js@xxxxxxxxxxxxxx>
• Re: Still problem compiling new bttv driver
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Best capture/encode techniques/tools?
  • From: Darek M <darek@xxxxxxx>
• Re: Re: Still problem compiling new bttv driver
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: Still problem compiling new bttv driver
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• How to capture frames from all 4 AV inputs on a Bt878 chipset card? (fwd)
  • From: Gonzalo Servat <gs@xxxxxxxxxxxxxxxx>
• pixelview + bttv
  • From: k0n <k0n@xxxxxxxx>
• Still problem compiling new bttv driver
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: [patch] MPlayer support for v4l2
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: Good USB video
  • From: Ed Okerson <eokerson@xxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: alsa@xxxxxxxxxxxx
• Re: GPIO access on bt878
  • From: "hexa" <hexa@xxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: [patch] MPlayer support for v4l2
  • From: Jindrich Makovicka <makovick@xxxxxxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: alsa@xxxxxxxxxxxx
• Re: Good USB video
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: alsa@xxxxxxxxxxxx
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: alsa@xxxxxxxxxxxx
• Re: [patch] MPlayer support for v4l2
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Good USB video
  • From: Ed Okerson <eokerson@xxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Alan Cox <alan@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ville Syrjälä <syrjala@xxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Alan Cox <alan@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• RE: GPIO access on bt878
  • From: "Scott Tillman" <tillman@xxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ville Syrjälä <syrjala@xxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ville Syrjälä <syrjala@xxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: alsa@xxxxxxxxxxxx
• [patch] saa7134 audio norm scan
  • From: Jindrich Makovicka <makovick@xxxxxxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• Re: GPIO access on bt878
  • From: "Andrey P. Vasilyev" <andrey_vasilyev@xxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• oops with osprey 230
  • From: Jure Pecar <pegasus@xxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: alsa@xxxxxxxxxxxx
• Re: V4L #defines for Quickcam (was: Re: buggy v4l apps)
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: V4L #defines for Quickcam (was: Re: buggy v4l apps)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: V4L #defines for Quickcam (was: Re: buggy v4l apps)
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: GPIO access on bt878
  • From: "hexa" <hexa@xxxxxxxx>
• Re: V4L #defines for Quickcam (was: Re: buggy v4l apps)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: V4L #defines for Quickcam (was: Re: buggy v4l apps)
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: bttv+scsi writing => corrupted frames
  • From: Arne Caspari <arnem@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: V4L #defines for Quickcam (was: Re: buggy v4l apps)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: V4L #defines for Quickcam (was: Re: buggy v4l apps)
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Alan Cox <alan@xxxxxxxxxx>
• V4L #defines for Quickcam (was: Re: buggy v4l apps)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• [patch] MPlayer support for v4l2
  • From: Jindrich Makovicka <makovick@xxxxxxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: bttv+scsi writing => corrupted frames
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Alan Cox <alan@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Trent Piepho <xyzzy@xxxxxxxxxxxxx>
• Re: Recommended NTSC output card ?
  • From: Daniel Jircik <pannomat@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• How to capture frames from all 4 AV inputs on a Bt878 chipset card?
  • From: Gonzalo Servat <gs@xxxxxxxxxxxxxxxx>
• Recommended NTSC output card ?
  • From: Tim Halle <tim_halle@xxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ed Okerson <eokerson@xxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Alan Cox <alan@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• upgrading to a newer version of bttv
  • From: "Jo�lle Nakhl�" <jackala82@xxxxxxxxxxx>
• Re: bttv+scsi writing => corrupted frames
  • From: Jure Pecar <pegasus@xxxxxxxxxxx>
• 4 port MPEG/MJPEG capable bt8x8 cards
  • From: <lgaby@xxxxxxxxxx>
• Re: GPIO access on bt878
  • From: "Andrey P. Vasilyev" <andrey_vasilyev@xxxxxxx>
• Re: bttv+scsi writing => corrupted frames
  • From: Alan Cox <alan@xxxxxxxxxx>
• Re: GPIO access on bt878
  • From: "ho ho ho ..." <hobobcat@xxxxxxxxxxxx>
• Re: bttv+scsi writing => corrupted frames
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: bttv+scsi writing => corrupted frames
  • From: Alan Cox <alan@xxxxxxxxxx>
• bttv+scsi writing => corrupted frames
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: GPIO access on bt878
  • From: "Andrey P. Vasilyev" <andrey_vasilyev@xxxxxxx>
• buggy v4l apps (was: VIDIOCSYNC and bad data)
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• GPIO access on bt878
  • From: "ho ho ho ..." <hobobcat@xxxxxxxxxxxx>
• Re: VIDIOCSYNC and bad data
  • From: Thomas <spiralman@xxxxxxxxxxxx>
• Re: Device or resource busy
  • From: "Andrey P. Vasilyev" <andrey_vasilyev@xxxxxxx>
• RE: Device or resource busy
  • From: "Matt Brocklehurst" <matt@xxxxxxxxxxxxxxxx>
• Re: Device or resource busy
  • From: "Andrey P. Vasilyev" <andrey_vasilyev@xxxxxxx>
• Device or resource busy
  • From: "Matt Brocklehurst" <matt@xxxxxxxxxxxxxxxx>
• Re: Hauppauge Video Connectors
  • From: Loren M Lang <lorenl@xxxxxxxxxxx>
• v4l2: open /dev/v4l/video0: No such device
  • From: Bob Lockie <bjlockie@xxxxxxxxx>
• Re: VIDIOCSYNC and bad data
  • From: Thomas <spiralman@xxxxxxxxxxxx>
• Re: Starting with video recording
  • From: "Jo�lle Nakhl�" <jackala82@xxxxxxxxxxx>
• Re: VIDIOCSYNC and bad data
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: VIDIOCSYNC and bad data
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: Question about "Make bttv 0.9.11"
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: Hauppauge Video Connectors
  • From: David Balazic <david.balazic@xxxxxxxxx>
• Hauppauge Video Connectors
  • From: Loren M Lang <lorenl@xxxxxxxxxxx>
• Question about "Make bttv 0.9.11"
  • From: "ho ho ho ..." <hobobcat@xxxxxxxxxxxx>
• RE: SAA7134 Sound disappeared
  • From: "Christian Hack" <christianh@xxxxxxxxxxxxxxx>
• Re: SAA7134 Sound disappeared
  • From: Rob Nielsen <rob@xxxxxxxxxxx>
• Re: Starting with video recording
  • From: Roger Oberholtzer <roger@xxxxxx>
• Starting with video recording
  • From: "Jo�lle Nakhl�" <jackala82@xxxxxxxxxxx>
• PCTV pro : cannot tune high freq.
  • From: Rolf Gerrits <Rolf.Gerrits@xxxxxxxxxx>
• VIDIOCSYNC and bad data
  • From: Thomas <spiralman@xxxxxxxxxxxx>
• XAWTV & FFMPEG. Error making bttv-0.9.11
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: SAA7134 Sound disappeared
  • From: Christian Hack <christianh@xxxxxxxxxxxxxxx>
• Re: SAA7134 Sound disappeared
  • From: Rob Nielsen <rob@xxxxxxxxxxx>
• Re: re : converting from RGB24 to yuv411
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: Re: Using XAWTV in parallel with FFMPEG
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: re : converting from RGB24 to yuv411
  • From: "sting sting" <zstingx@xxxxxxxxxxx>
• Re: Using XAWTV in parallel with FFMPEG
  • From: Lamar Owen <lowen@xxxxxxxx>
• Re: Using XAWTV in parallel with FFMPEG
  • From: David Balazic <david.balazic@xxxxxxxxx>
• Re: Using XAWTV in parallel with FFMPEG
  • From: "hexa" <hexa@xxxxxxxx>
• Re: re : converting from RGB24 to yuv411
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• re : converting from RGB24 to yuv411
  • From: "sting sting" <zstingx@xxxxxxxxxxx>
• Re: Using XAWTV in parallel with FFMPEG
  • From: Lamar Owen <lowen@xxxxxxxx>
• btaudio
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: convering from RGB24 to YUV 411 planar
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• convering from RGB24 to YUV 411 planar
  • From: "sting sting" <zstingx@xxxxxxxxxxx>
• Re: marvel driver for kernel 2.4.20-8
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Pinacle PCTV New tuner support
  • From: dj <dj@xxxxxxxxxx>
• Re: Using XAWTV in parallel with FFMPEG
  • From: Lucas Correia Villa Real <lucasvr@xxxxxxxxxxxxx>
• Re: Using XAWTV in parallel with FFMPEG
  • From: Yurij Sysoev <winix@xxxxxxxxx>
• Using XAWTV in parallel with FFMPEG
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• (no subject)
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: ADV601/wavelet
  • From: Geoffrey Espin <espin@xxxxxxxxx>
• MT2050
  • From: "tesp70 tesp70" <tesp70@xxxxxxxxxxx>
• Re: Multi-port video card support
  • From: Champ Clark <champ@xxxxxxxxxxxxxxxxx>
• Re: Multi-port video card support
  • From: Lamar Owen <lowen@xxxxxxxx>
• Re: marvel driver for kernel 2.4.20-8
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• marvel driver for kernel 2.4.20-8
  • From: riza theresa batista <riza_theresa.batista@xxxxxxxxx>
• Re: ADV601/wavelet
  • From: Abraham van der Merwe <abz@xxxxxxxxxxxx>
• Re: ADV601/wavelet
  • From: Alan Cox <alan@xxxxxxxxxx>
• Re: ADV601/wavelet
  • From: Alan Hall <alan@xxxxxxxxxxxxxx>
• Re: Re: Multi-port video card support
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: mmaped rgb data does not line up
  • From: Thomas <spiralman@xxxxxxxxxxxx>
• RE: SAA7134 Sound disappeared
  • From: "Christian Hack" <christianh@xxxxxxxxxxxxxxx>
• Re: mmaped rgb data does not line up
  • From: Peter Farrow <peter@xxxxxxxxxxx>
• mmaped rgb data does not line up
  • From: Thomas <spiralman@xxxxxxxxxxxx>
• Is there a driver for saa7108 on RH9
  • From: Guy Fraser <guytron@xxxxxxxxxxxx>
• Cinergy 400 (saa7134) problem with sound
  • From: cougar@xxxxxxx
• SAA7134-20030724-SNAPSHOT - was Re: SAA7134 Sound disappeared
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: Multi-port video card support
  • From: Champ Clark <champ@xxxxxxxxxxxxxxxxx>
• Re: Multi-port video card support
  • From: Lamar Owen <lowen@xxxxxxxx>
• Re: use of vbi device
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• ADV601/wavelet
  • From: Geoffrey Espin <espin@xxxxxxxxx>
• Re: Further question about I2C and BTTV
  • From: Justin Schoeman <justin@xxxxxxxxxxxxxxxxxxxx>
• Re: Further question about I2C and BTTV
  • From: "ho ho ho ..." <hobobcat@xxxxxxxxxxxx>
• xawtv to multiple X displays
  • From: Bryan Koschmann - GKT <gktnews@xxxxxxxxxx>
• Re: Further question about I2C and BTTV
  • From: Justin Schoeman <justin@xxxxxxxxxxxxxxxxxxxx>
• Digital cameras with Webcam function?
  • From: "Jago Pearce" <jago25_98@xxxxxxxxxxx>
• compile problems for wnv.o (Winnov Videum)
  • From: "Amir Malik" <a@xxxxxxxx>
• Further question about I2C and BTTV
  • From: ho ho <hobobcat@xxxxxxxxxxxx>
• Re: SAA7134 Sound disappeared
  • From: Rob Nielsen <rob@xxxxxxxxxxx>
• Re: SAA7134 Sound disappeared
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: Hunk suceeded patching 2.4.21 kernel
  • From: hermann pitton <hermann.pitton@xxxxxx>
• RE: Suggestions for buying camera
  • From: "Stephen Crampton" <stevec@xxxxxxxxx>
• Suggestions for buying camera
  • From: Bikash K Agarwalla <bikash@xxxxxxxxxxxxx>
• Undefined symbol when loading zoran. (driver zoran-0.9.4)
  • From: VIGIER Lionel Andre Marcel Fouad <vigier@xxxxxxxxxxx>
• prolink pixelview playtv pro sound issues
  • From: "Dane Kantner" <webmaster@xxxxxxxxxx>
• Voodoo3 3500 TV card
  • From: "Kevin Carter" <kcee@xxxxxxxxxxx>
• logitech 4000 quickcam pro - getting a picture only in black and white
  • From: "sting sting" <zstingx@xxxxxxxxxxx>
• RE: multiple open()'s on the same device
  • From: "Ryan Ayers" <rayers.list@xxxxxxxxxx>
• Re: Question about I2C and BTTV
  • From: "hexa" <hexa@xxxxxxxx>
• Re: SAA7134 Sound disappeared
  • From: "Christian Hack" <christianh@xxxxxxxxxxxxxxx>
• Re: SAA7134 Sound disappeared
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Hunk suceeded patching 2.4.21 kernel
  • From: "Miguel A. Rasero" <tecnico@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: Question about I2C and BTTV
  • From: Justin Schoeman <justin@xxxxxxxxxxxxxxxxxxxx>
• Re: Question about I2C and BTTV
  • From: ho ho <hobobcat@xxxxxxxxxxxx>
• Re: saa7134 field oopses
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: Question about I2C and BTTV
  • From: Justin Schoeman <justin@xxxxxxxxxxxxxxxxxxxx>
• Re: SAA7134 Sound disappeared
  • From: Tim Connors <tconnors@xxxxxxxxxxxxxxxxx>
• Question about I2C and BTTV
  • From: ho ho <hobobcat@xxxxxxxxxxxx>
• Re: capture software recommendations
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: SAA7134 Sound disappeared
  • From: Rob Nielsen <rob@xxxxxxxxxxx>
• RE: SAA7134 Sound disappeared
  • From: "Christian Hack" <christianh@xxxxxxxxxxxxxxx>
• Re: SAA7134 Sound disappeared
  • From: Rob Nielsen <rob@xxxxxxxxxxx>
• RE: SAA7134 Sound disappeared
  • From: "Christian Hack" <christianh@xxxxxxxxxxxxxxx>
• SAA7134 Sound disappeared
  • From: Rob Nielsen <rob@xxxxxxxxxxx>
• newbie with an ATI TV card - Linux RH9
  • From: "Orrin Winton" <wn1z@xxxxxxxxxxx>
• Re: capture software recommendations
  • From: "Canek Peláez Valdés" <canek@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: streaming video
  • From: Daniel Jircik <pannomat@xxxxxxxxxx>
• capture software recommendations
  • From: Bryan Koschmann - GKT <gktnews@xxxxxxxxxx>
• Re: streaming video
  • From: ANTHONYGLORIA@xxxxxxxxxxxxx
• Re: streaming video
  • From: tps@xxxxxxxxxxx
• streaming video
  • From: Bryan Koschmann - GKT <gktnews@xxxxxxxxxx>
• Re: multiple open()'s on the same device
  • From: Arne Caspari <arnem@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: multiple open()'s on the same device
  • From: Lucas Correia Villa Real <lucasvr@xxxxxxxxxxxxx>
• RE: multiple open()'s on the same device
  • From: "Ryan Ayers" <rayers.list@xxxxxxxxxx>
• Re: multiple open()'s on the same device
  • From: Arne Caspari <arnem@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: saa7134 field oopses
  • From: jostman@xxxxxxxxx (Juho Östman)
• Re: saa7134 field oopses
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: multiple open()'s on the same device
  • From: Gleicon Moraes <gleicon@xxxxxxxxxxxx>
• Re: multiple open()'s on the same device
  • From: "William M. Brack" <wbrack@xxxxxxxxxx>
• Re: multiple open()'s on the same device
  • From: Lucas Correia Villa Real <lucasvr@xxxxxxxxxxxxx>
• VS: SCART RGB SYNC signal
  • From: "Joni Kahara" <joni.kahara@xxxxxxx>
• Re: multiple open()'s on the same device
  • From: Arne Caspari <arnem@xxxxxxxxxxxxxxxxxxxxxxxx>
• scheduling in interrupt context in i2c
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• SCART RGB SYNC signal
  • From: David Balazic <david.balazic@xxxxxxxxx>
• Re: AIW VE: Record from composite?
  • From: Alan Murrell <alanm@xxxxxxxxx>
• AIW VE: Record from composite?
  • From: Alan Murrell <alanm@xxxxxxxxx>
• get help about TV box under linux
  • From: "Fang, Li (方麗 IES)" <Fang.Li@xxxxxxxxxxxx>
• OT: finding schematics
  • From: Bryan Koschmann - GKT <gktnews@xxxxxxxxxx>
• Tuner Type for the PAL_BG WinFast 2000XP
  • From: "Scott Maskiel" <Scott_Maskiel@xxxxxxxxxxxxx>
• RE: multiple open()'s on the same device
  • From: Ed Okerson <eokerson@xxxxxxxxxxxxxxxx>
• RE: multiple open()'s on the same device
  • From: "Curi Fabio Eduardo (SFL)" <curif@xxxxxxxxxxxxxxxxx>
• Re: PC10Plus technical features sought
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• use of vbi device
  • From: "Jo�lle Nakhl�" <jackala82@xxxxxxxxxxx>
• Multi-port video card support
  • From: Trey Waters <v4l@xxxxxxxxxxxxxxxxxx>
• PC10Plus technical features sought
  • From: VIGIER Lionel Andre Marcel Fouad <vigier@xxxxxxxxxxx>
• saa7134 field oopses
  • From: jostman@xxxxxxxxx (Juho Östman)
• [RFC/PATCH] 2/2 v4l: sysfs'ify bttv driver
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• [RFC/PATCH] 1/2 v4l: sysfs'ify video4linux core
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: multiple open()'s on the same device
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: [RFC/PATCH] sysfs'ify video4linux
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• RE: SAA7134 multiple cards - options
  • From: "Christian Hack" <christianh@xxxxxxxxxxxxxxx>
• RE: SAA7134 multiple cards - options
  • From: mhargrea@xxxxxxxxxxx
• Re: [RFC/PATCH] sysfs'ify video4linux
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• RE: SAA7134 multiple cards - options
  • From: "Christian Hack" <christianh@xxxxxxxxxxxxxxx>
• Re: SAA7134 multiple cards - options
  • From: Bill Eldridge <bill@xxxxxxx>
• RE: SAA7134 multiple cards - options
  • From: "Christian Hack" <christianh@xxxxxxxxxxxxxxx>
• Re: multiple open()'s on the same device
  • From: Lucas Correia Villa Real <lucasvr@xxxxxxxxxxxxx>
• RE: multiple open()'s on the same device
  • From: "Ryan Ayers" <rayers.list@xxxxxxxxxx>
• kernel & bttv update causes snow
  • From: "D. Hugh Redelmeier" <hugh@xxxxxxxxxx>
• RE: PVR250 tuning problems
  • From: "shailesh17" <shailesh17@xxxxxxxxx>
• PVR250 tuning problems
  • From: "shailesh17" <shailesh17@xxxxxxxxx>
• RE: multiple open()'s on the same device
  • From: Ed Okerson <eokerson@xxxxxxxxxxxxxxxx>
• Re: channels all off by 1? bttv prolink pixelview playtv pro
  • From: "Dane Kantner" <webmaster@xxxxxxxxxx>
• Re: channels all off by 1? bttv prolink pixelview playtv pro
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• channels all off by 1? bttv prolink pixelview playtv pro
  • From: "Dane Kantner" <webmaster@xxxxxxxxxx>
• RE: multiple open()'s on the same device
  • From: "Ryan Ayers" <rayers.list@xxxxxxxxxx>
• Re: multiple open()'s on the same device
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• Re: multiple open()'s on the same device
  • From: Lucas Correia Villa Real <lucasvr@xxxxxxxxxxxxx>
• Re: multiple open()'s on the same device
  • From: "Christian Hack" <christianh@xxxxxxxxxxxxxxx>
• Re: multiple open()'s on the same device
  • From: Lucas Correia Villa Real <lucasvr@xxxxxxxxxxxxx>
• Re: multiple open()'s on the same device
  • From: "Christian Hack" <christianh@xxxxxxxxxxxxxxx>
• multiple open()'s on the same device
  • From: Lucas Correia Villa Real <lucasvr@xxxxxxxxxxxxx>
• Re: ghost effect and black borders
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: ghost effect and black borders
  • From: Pascal Bleser <pascal.bleser@xxxxxxxxx>
• Re: ghost effect and black borders
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• Re: ghost effect and black borders
  • From: Pascal Bleser <pascal.bleser@xxxxxxxxx>
• Re: ghost effect and black borders
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• ghost effect and black borders
  • From: Pascal Bleser <pascal.bleser@xxxxxxxxx>
• SAA7134 multiple cards - options
  • From: "Christian Hack" <christianh@xxxxxxxxxxxxxxx>
• ioremap: how to
  • From: rahul patil <rahulpatilv@xxxxxxxxx>
• Re: modprobe -r saa7134 segfaults
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: NTSC capture card recomendation
  • From: Richard Smith <rsmith@xxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Richard Smith <rsmith@xxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: "James A. Pattie" <james@xxxxxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Richard Smith <rsmith@xxxxxxxxxxxx>
• Re: All chanels work but the most important
  • From: Martijn Brouwer <eambrouwer@xxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: "James A. Pattie" <james@xxxxxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Bill Eldridge <bill@xxxxxxx>
• Re: NTSC capture card recomendation
  • From: "James A. Pattie" <james@xxxxxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Richard Smith <rsmith@xxxxxxxxxxxx>
• Re: Capture using multiple tuner cards..
  • From: "Harondel J. Sibble" <help@xxxxxxxxx>
• ati tv wonder comes up with audio initialized
  • From: "Harondel J. Sibble" <help@xxxxxxxxx>
• Re: audio with composite input
  • From: "Dane Kantner" <webmaster@xxxxxxxxxx>
• cambozola...
  • From: "Antonio J. Torres" <antonio.torres@xxxxxxxxxx>
• Re: All chanels work but the most important
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: [RFC/PATCH] sysfs'ify video4linux
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: saa7134 0.2.8 - My images appear softer, and other comments.
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: alsa@xxxxxxxxxxxx
• blocky images on geforce4
  • From: "Multilayer Trading 145cc" <info@xxxxxxxxxxxxx>
• New tuner chip support for PCTV Rave
  • From: Dusariez Jean-Francois <jfdusar@xxxxxxxxxx>
• audio with composite input
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Vidiot <brown@xxxxxxxxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Vidiot <brown@xxxxxxxxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Vidiot <brown@xxxxxxxxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Steven Ellis <pinguellis@xxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• RE: saa7134 0.2.8 - My images appear softer, and other comments.
  • From: "Christian Hack" <christianh@xxxxxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Vidiot <brown@xxxxxxxxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Richard Smith <rsmith@xxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Richard Smith <rsmith@xxxxxxxxxxxx>
• saa7134 0.2.8 - My images appear softer, and other comments.
  • From: Steven Ellis <pinguellis@xxxxxxxxxxx>
• All chanels work but the most important
  • From: Martijn Brouwer <eambrouwer@xxxxxxxxxx>
• bttvgrab
  • From: Tom Lippmann <lippmann.2@xxxxxxx>
• PCMCIA Frame Grabber
  • From: "Mike Schumi" <schumi@xxxxxxxxxx>
• Re: [RFC/PATCH] sysfs'ify video4linux
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• modprobe -r saa7134 segfaults
  • From: Florian Zierer <florian@xxxxxxxxxxxx>
• Radeon 9700 pro All in Wonder
  • From: Peter Farrow <peter@xxxxxxxxxxx>
• Re: Where to find video4linux documentation ?
  • From: Ottavio Campana <ottavio@xxxxxxxxxxxxx>
• Where to find video4linux documentation ?
  • From: VIGIER Lionel Andre Marcel Fouad <vigier@xxxxxxxxxxx>
• Re: [RFC/PATCH] sysfs'ify video4linux
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• xawtv bttv2 problem
  • From: "capri.arnaud@xxxxxxxx" <capri.arnaud@xxxxxxxx>
• Re: NTSC capture card recomendation
  • From: alsa@xxxxxxxxxxxx
• Re: Re: Executing Xawtv and Streamer simultaneously
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Vidiot <brown@xxxxxxxxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Vidiot <brown@xxxxxxxxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Gene Heskett <gene.heskett@xxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Gene Heskett <gene.heskett@xxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Vidiot <brown@xxxxxxxxxxxxxxxxxx>
• Innes Radio Capture FM 0.1.1
  • From: tom burkart <tom@xxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Vidiot <brown@xxxxxxxxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: NTSC capture card recomendation
  • From: Vidiot <brown@xxxxxxxxxxxxxxxxxx>
• SAA7134 - No audio via DSP _or_ card output and others
  • From: "Christian Hack" <christianh@xxxxxxxxxxxxxxx>
• Re: [RFC/PATCH] sysfs'ify video4linux
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• NTSC capture card recomendation
  • From: Richard Smith <rsmith@xxxxxxxxxxxx>
• Re: [RFC/PATCH] sysfs'ify video4linux
  • From: Mark McClelland <mark@xxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH] sysfs'ify video4linux
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: Re: screen flicker with xawtv
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Innes Radio Capture FM 0.1.0
  • From: tom burkart <tom@xxxxxxxxxx>
• Re: nforce2 + wintv pci not working
  • From: Mikael Magnusson <mangosoft@xxxxxxxxx>
• Re: nforce2 + wintv pci not working
  • From: James Oakley <jfunk@xxxxxxxxxxxxxx>
• Re: Add a webcam streams as another tv channel
  • From: Ali Naqi <al_nax4@xxxxxxxxx>
• Re: nforce2 + wintv pci not working
  • From: Mikael Magnusson <mangosoft@xxxxxxxxx>
• nforce2 + wintv pci not working
  • From: Mikael Magnusson <mangosoft@xxxxxxxxx>
• Re: screen flicker with xawtv
  • From: Bryan Koschmann - GKT <gktnews@xxxxxxxxxx>
• Re: screen flicker with xawtv
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• screen flicker with xawtv
  • From: Bryan Koschmann - GKT <gktnews@xxxxxxxxxx>
• Re: [RFC/PATCH] sysfs'ify video4linux
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Executing Xawtv and Streamer simultaneously
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: [RFC/PATCH] sysfs'ify video4linux
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• [RFC/PATCH] sysfs'ify video4linux
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• RE: Color capture problems
  • From: rkirkend@xxxxxxxxxxxx
• Re: convert from YUV420P TO YUV411
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• (no subject)
  • From: "Benjamin Sonntag" <benjamin@xxxxxxxxxxxx>
• Re: convert from YUV420P TO YUV411
  • From: Yurij Sysoev <winix@xxxxxxxxx>
• convert from YUV420P TO YUV411
  • From: "sting sting" <qwejohn@xxxxxxxxxxx>
• RE: Color capture problems
  • From: "Joni Kähärä" <joni.kahara@xxxxxxx>
• Re: Add a webcam streams as another tv channel
  • From: "Brian Johnson" <bjohnson@xxxxxxxxxxxxxxxxxxxxxx>
• Re: Add a webcam streams as another tv channel
  • From: Rob Shortt <rob@xxxxxxxxxxxxxxxxxxx>
• Add a webcam streams as another tv channel
  • From: "Brian Johnson" <bjohnson@xxxxxxxxxxxxxxxxxxxxxx>
• Color capture problems
  • From: rkirkend@xxxxxxxxxxxx
• Re: OT: overlay and clipping
  • From: Franz Reinhardt <fre@xxxxxxxxxx>
• Re: how to get best capture size
  • From: Robert Reid <robreid@xxxxxxxxxxxxxxx>
• Re: scantv - compilation problems
  • From: Casper Pedersen <cpedersen@xxxxxxxxx>
• Re: Is it possible to compile SAA7134 under kernel 2.2.x?
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• scantv - compilation problems
  • From: Casper Pedersen <cpedersen@xxxxxxxxx>
• Re: Problem conpiling SAA7134
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Problem conpiling SAA7134
  • From: Geoff Shang <gshang@xxxxxxxxx>
• tuner works, video twitchy
  • From: Bryan Koschmann - GKT <gktnews@xxxxxxxxxx>
• Re: how to get best capture size
  • From: Arne Caspari <arnem@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: cannot find tuner.o
  • From: warren hrach <warren11@xxxxxxx>
• Is it possible to compile SAA7134 under kernel 2.2.x?
  • From: Geoff Shang <gshang@xxxxxxxxx>
• Re: OT: overlay and clipping
  • From: Arne Caspari <arnem@xxxxxxxxxxxxxxxxxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: Yurij Sysoev <winix@xxxxxxxxx>
• Re: cannot find tuner.o
  • From: "Multilayer Trading 145cc" <info@xxxxxxxxxxxxx>
• OT: overlay and clipping
  • From: Franz Reinhardt <fre@xxxxxxxxxx>
• Re: cannot find tuner.o
  • From: alsa@xxxxxxxxxxxx
• Re: how to get best capture size
  • From: Steven Ellis <pinguellis@xxxxxxxxxxx>
• Re: cannot find tuner.o
  • From: Bryan Koschmann - GKT <gktnews@xxxxxxxxxx>
• Re: cannot find tuner.o
  • From: warren hrach <warren11@xxxxxxx>
• Re: cannot find tuner.o
  • From: Bryan Koschmann - GKT <gktnews@xxxxxxxxxx>
• Re: cannot find tuner.o
  • From: warren hrach <warren11@xxxxxxx>
• Re: cannot find tuner.o
  • From: Bryan Koschmann - GKT <gktnews@xxxxxxxxxx>
• Re: cannot find tuner.o
  • From: alsa@xxxxxxxxxxxx
• cannot find tuner.o
  • From: Bryan Koschmann - GKT <gktnews@xxxxxxxxxx>
• Recording TV shows using "streamer"
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: how to get best capture size
  • From: Robert Reid <robreid@xxxxxxxxxxxxxxx>
• Re: how to get best capture size
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• how to get best capture size
  • From: Jacek Dylak <dylak@xxxxxxxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: James REGIS <james.regis@xxxxxxxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: James REGIS <james.regis@xxxxxxxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• RE: how to improve the capture speed from V4L
  • From: Tölgyesi Péter <Tolgyesi.Peter@xxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: Steven Ellis <pinguellis@xxxxxxxxxxx>
• Re: what is PAL-NC and how to set it
  • From: Jacek Dylak <dylak@xxxxxxxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: James REGIS <james.regis@xxxxxxxxxxxxxx>
• Re: what is PAL-NC and how to set it
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• what is PAL-NC and how to set it
  • From: Jacek Dylak <dylak@xxxxxxxxxxxxxx>
• Re: Loading a DCF with a meteorII/MC
  • From: Cord Seele <cs@xxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: Loading a DCF with a meteorII/MC
  • From: "capri.arnaud@xxxxxxxx" <capri.arnaud@xxxxxxxx>
• Re: Loading a DCF with a meteorII/MC
  • From: Cord Seele <cs@xxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: James REGIS <james.regis@xxxxxxxxxxxxxx>
• OT: Matrox Meteor 1 framegrabb into bmp
  • From: "Joni Kahara" <joni.kahara@xxxxxxx>
• Loading a DCF with a meteorII/MC
  • From: "capri.arnaud@xxxxxxxx" <capri.arnaud@xxxxxxxx>
• Re: Matrox Meteor 1 framegrabb into bmp
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: zw_0000 <zw_0000@xxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: James REGIS <james.regis@xxxxxxxxxxxxxx>
• Re: how to improve the capture speed from V4L
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• how to improve the capture speed from V4L
  • From: James REGIS <james.regis@xxxxxxxxxxxxxx>
• Re: Pinnacle PCTV pro settings, not a MT2032
  • From: Gunther.Mayer@xxxxxxxxxxx (Gunther Mayer)
• Re: Matrox Meteor 1 framegrabb into bmp
  • From: Gene Heskett <gene.heskett@xxxxxxxxxxx>
• Re: Matrox Meteor 1 framegrabb into bmp
  • From: Gene Heskett <gene.heskett@xxxxxxxxxxx>
• Re: New to this
  • From: "Dane Kantner" <webmaster@xxxxxxxxxx>
• Re: Matrox Meteor 1 framegrabb into bmp
  • From: schnatte@xxxxxxx
• Re: Re: Pinnacle PCTV pro settings
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: Matrox Meteor 1 framegrabb into bmp
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: Matrox Meteor 1 framegrabb into bmp
  • From: schnatte@xxxxxxx
• Re: Pinnacle PCTV pro settings
  • From: "Donald Tournier" <d.tournier@xxxxxxxxxxxxx>
• Re: Matrox Meteor 1 framegrabb into bmp
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: Matrox Meteor 1 framegrabb into bmp
  • From: schnatte@xxxxxxx
• Re: Probs with DC10Plus, xawtv and bigphysarea patch
  • From: "Macca .." <how_j00_doing@xxxxxxxxxxx>
• Re: Probs with DC10Plus, xawtv and bigphysarea patch
  • From: "Macca .." <how_j00_doing@xxxxxxxxxxx>
• RE: Need help, getting fuzzy/bad picture in xawtv
  • From: Mike Miller <miller44@xxxxxxxxxxxxx>
• RE: Need help, getting fuzzy/bad picture in xawtv
  • From: Mike Miller <miller44@xxxxxxxxxxxxx>
• Re: Need help, getting fuzzy/bad picture in xawtv
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Need help, getting fuzzy/bad picture in xawtv
  • From: Mike Miller <miller44@xxxxxxxxxxxxx>
• Re: pcimcia frame-grabber
  • From: Torgeir Veimo <torgeir@xxxxxxxxx>
• Re: Multiple bttv cards.
  • From: Johnny Strom <jonny.strom@xxxxxxxxxx>
• Re: Multiple bttv cards.
  • From: Bill Eldridge <bill@xxxxxxx>
• Re: Multiple bttv cards.
  • From: Mark Charter <mark@xxxxxxxxxx>
• Re: Multiple bttv cards.
  • From: Johnny Strom <jonny.strom@xxxxxxxxxx>
• pcimcia frame-grabber
  • From: Jacek Dylak <dylak@xxxxxxxxxxxxxx>
• RE: New to this
  • From: "David McBride" <DMcBride@xxxxxxxxxxxxxxxxxx>
• New to this
  • From: "Dean Last" <dlast@xxxxxxxxxxxxxx>
• Re: Multiple bttv cards.
  • From: Bill Eldridge <bill@xxxxxxx>
• Multiple bttv cards.
  • From: Johnny Strom <jonny.strom@xxxxxxxxxx>
• Re: xawtv ,etc over VNC?
  • From: Darek M <darek@xxxxxxx>
• Re: Matrox Meteor 1 framegrabb into bmp
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: Pinnacle PCTV pro settings
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: Pinnacle PCTV pro settings
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: Matrox Meteor 1 framegrabb into bmp
  • From: schnatte@xxxxxxx
• Pinnacle PCTV pro settings
  • From: "Donald Tournier" <d.tournier@xxxxxxxxxxxxx>
• Re: xawtv ,etc over VNC?
  • From: David Balazic <david.balazic@xxxxxxxxx>
• Re: Matrox Meteor 1 framegrabb into bmp
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• VS: xawtv ,etc over VNC?
  • From: "Joni Kahara" <joni.kahara@xxxxxxx>
• xawtv ,etc over VNC?
  • From: Darek M <darek@xxxxxxx>
• Problem with Hauppauge WinTV dbx model 401
  • From: Scott Elliott <selliott@xxxxxxxxxxxxxx>
• Re: Probs with DC10Plus, xawtv and bigphysarea patch
  • From: Ronald Bultje <rbultje@xxxxxxxxxxxxxxxxxxx>
• is the latest v4l2 patches usable?
  • From: Abraham van der Merwe <abz@xxxxxxxxxxxx>
• Re: mpeg4ip and firewire
  • From: Heiko Recktenwald <uzs106@xxxxxxxxxxxxxxxxxxxx>
• Re: Probs with DC10Plus, xawtv and bigphysarea patch
  • From: "Macca .." <how_j00_doing@xxxxxxxxxxx>
• Probs with DC10Plus, xawtv and bigphysarea patch
  • From: "Macca .." <how_j00_doing@xxxxxxxxxxx>
• Re: mpeg4ip and firewire
  • From: Daniel Jircik <pannomat@xxxxxxxxxx>
• Re: Switching audio offset on tda9887-based PCTV? - patch.
  • From: djgardner@xxxxxxxxxxxx
• gpio access
  • From: "hexa" <hexa@xxxxxxxx>
• Re: Matrox Meteor 1 framegrabb into bmp
  • From: Michael Veigel <michael.veigel@xxxxxxxxxxxxxxxxxxx>
• XAWTV and lircrc
  • From: "suriya mohan" <suriyamohan23@xxxxxxxxxxxxxx>
• Re: bttv - Radio sound quirks bug
  • From: David Balazic <david.balazic@xxxxxxxxx>
• Matrox Meteor 1 framegrabb into bmp
  • From: schnatte@xxxxxxx
• Re: bttv - Radio sound quirks bug
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: mpeg4ip and firewire
  • From: Heiko Recktenwald <uzs106@xxxxxxxxxxxxxxxxxxxx>
• Re: bttv - Radio sound quirks bug
  • From: David Balazic <david.balazic@xxxxxxxxx>
• Re: Switching audio offset on tda9887-based PCTV?
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: bttv - Radio sound quirks bug
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: mpeg4ip and firewire
  • From: Daniel Jircik <pannomat@xxxxxxxxxx>
• Switching audio offset on tda9887-based PCTV?
  • From: djgardner@xxxxxxxxxxxx
• Re: V4L2 and norm switching
  • From: Tom Zoerner <tomzo@xxxxxxxxxx>
• mpeg4ip and firewire
  • From: Heiko Recktenwald <uzs106@xxxxxxxxxxxxxxxxxxxx>
• Re: V4L2 and norm switching
  • From: Michael Hunold <hunold@xxxxxxxxxxxxxx>
• Re: V4L2 and norm switching
  • From: Michael Hunold <hunold@xxxxxxxxxxxxxx>
• Re: V4L2 and norm switching
  • From: Michael Hunold <hunold@xxxxxxxxxxxxxx>
• Re: bttv - Radio sound quirks bug
  • From: David Balazic <david.balazic@xxxxxxxxx>
• wiggliness (was Re: Pinnacle Studio PCTV BT848 w/ Temic 4036-FY5 tuner)
  • From: Aaron Brick <aaron@xxxxxxxxxx>
• Re: V4L2 and norm switching
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: V4L2 and norm switching
  • From: Tom Zoerner <tomzo@xxxxxxxxxx>
• Re: bttv - Radio sound quirks bug
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: bttv - Radio sound quirks bug
  • From: David Balazic <david.balazic@xxxxxxxxx>
• Re: EIO from saa7134
  • From: hermann pitton <hermann.pitton@xxxxxx>
• Re: saa7134 modprobe -r segfaults
  • From: Florian Zierer <florian@xxxxxxxxxxxx>
• Re: saa7134 modprobe -r segfaults
  • From: Florian Zierer <florian@xxxxxxxxxxxx>
• Re: Intel motherboard for Red Hat 7.3
  • From: "Of. Sistemas UGL XXX Azul - PAMI" <suc30informatica@xxxxxxxxxxx>
• Re: V4L2 and norm switching
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: Intel motherboard for Red Hat 7.3
  • From: Yurij Sysoev <winix@xxxxxxxxx>
• Re: Intel motherboard for Red Hat 7.3
  • From: alsa@xxxxxxxxxxxx
• compile error on bttv-0.9.10
  • From: zw_0000 <zw_0000@xxxxxxx>
• Re: a few questions about the SAA7134 chip and V4L2
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• a few questions about the SAA7134 chip and V4L2
  • From: Mike Russell <plazmatikz_nz@xxxxxxxxxxxxx>
• Intel motherboard for Red Hat 7.3
  • From: "Of. Sistemas UGL XXX Azul - PAMI" <suc30informatica@xxxxxxxxxxx>
• Re: V4L2 and norm switching
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Re: V4L2 and norm switching
  • From: Michael Hunold <hunold@xxxxxxxxxxxxxx>
• Re: V4L2 and norm switching
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• Newbi at V4L2
  • From: "capri.arnaud@xxxxxxxx" <capri.arnaud@xxxxxxxx>
• Re: saa7134 modprobe -r segfaults
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: V4L2 and norm switching
  • From: Michael Hunold <hunold@xxxxxxxxxxxxxx>
• Re: radeon 7500
  • From: Richard Bottoms <rbottoms@xxxxxxxxxxxxxxxxxx>
• Re: radeon 7500
  • From: Stephen Brooks <steve.brooks4@xxxxxxxxxx>
• EIO from saa7134
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• RE: radeon 7500
  • From: "Ziegler, Lynn" <LZIEGLER@xxxxxxxxxx>
• V4L2 and norm switching
  • From: Billy Biggs <vektor@xxxxxxxxxxxx>
• saa7134 modprobe -r segfaults
  • From: Florian Zierer <florian@xxxxxxxxxxxx>
• Re: Working LIRC for Cinergy 400 card using SAA7134 driver and patch from David Atkins with two small modifications
  • From: Ole Andre Schistad <oschista@xxxxxxxxx>
• RE: radeon 7500
  • From: Richard Bottoms <rbottoms@xxxxxxxxxxxxxxxxxx>
• RE: xawtv question on RedHat 9
  • From: Richard Bottoms <rbottoms@xxxxxxxxxxxxxxxxxx>
• Re: Working LIRC for Cinergy 400 card using SAA7134 driver and patch from David Atkins with two small modifications
  • From: Casper Pedersen <cpedersen@xxxxxxxxx>
• Working LIRC for Cinergy 400 card using SAA7134 driver and patch from David Atkins with two small modifications
  • From: Ole Andre Schistad <oschista@xxxxxxxxx>
• RE: xawtv question on RedHat 9
  • From: "Ziegler, Lynn" <LZIEGLER@xxxxxxxxxx>
• RE: .xawtv
  • From: "Ziegler, Lynn" <LZIEGLER@xxxxxxxxxx>
• RE: radeon 7500
  • From: "Ziegler, Lynn" <LZIEGLER@xxxxxxxxxx>
• Re: Capture using multiple tuner cards..
  • From: "Dane Kantner" <webmaster@xxxxxxxxxx>
• GPIO and I2C
  • From: "hexa" <hexa@xxxxxxxx>
• Re: VIDEO_PALETTE_YUV420P to VIDEO_PALETTE_RGB32
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: big endian computer
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: big endian computer
  • From: Tuukka Toivonen <tuukkat@xxxxxxxxxx>
• Re: Capture using multiple tuner cards..
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: VIDEO_PALETTE_YUV420P to VIDEO_PALETTE_RGB32
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: big endian computer
  • From: Ole Reinartz <ole.reinartz@xxxxxx>
• Re: xawtv question on RedHat 9
  • From: Brian Kelsay <bkelsay@xxxxxxxxxxx>
• Re: xawtv question on RedHat 9
  • From: Richard Bottoms <rbottoms@xxxxxxxxxxxxxxxxxx>
• Re: xawtv question on RedHat 9
  • From: Brian Kelsay <bkelsay@xxxxxxxxxxx>
• xawtv question on RedHat 9
  • From: Brian Kelsay <bkelsay@xxxxxxxxxxx>
• .xawtv example found
  • From: Richard Bottoms <rbottoms@xxxxxxxxxxxxxxxxxx>
• VIDEO_PALETTE_YUV420P to VIDEO_PALETTE_RGB32
  • From: Giampaolo Bellini <giampaolobellini@xxxxxx>
• .xawtv
  • From: Richard Bottoms <rbottoms@xxxxxxxxxxxxxxxxxx>
• Re: Not getting any picture in Xawtv w/correctly installed BTTV drivers....help/ideas anyone? *lots of info provided - Please help*
  • From: warren hrach <warren11@xxxxxxx>
• big endian computer
  • From: Ottavio Campana <ottavio@xxxxxxxxxxxxx>
• Re: Capture using multiple tuner cards..
  • From: "Dane Kantner" <webmaster@xxxxxxxxxx>
• radeon 7500
  • From: Richard Bottoms <rbottoms@xxxxxxxxxxxxxxxxxx>
• Re: v4l2 ioctl DQBUF error EIO
  • From: Gerd Knorr <kraxel@xxxxxxxxxxx>
• Re: Capture using multiple tuner cards..
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• Re: almost there...
  • From: Michel Bardiaux <mbardiaux@xxxxxxxxxxx>
• No sound from 878TV Rev 3E (kernel crash with bttv)
  • From: Markku Tavasti <tavasti@xxxxxx>
• Re: flyvideo 3100 with saa713x mandrake 9.1
  • From: "Dane Kantner" <webmaster@xxxxxxxxxx>
• Time shift recoding
  • From: Loren M Lang <lorenl@xxxxxxxxxxx>
• Not getting any picture in Xawtv w/correctly installed BTTV drivers....help/ideas anyone? *lots of info provided - Please help*
  • From: Mike Miller <miller44@xxxxxxxxxxxxx>
• Re: ffmpeg
  • From: "Christopher Biggs" <listjunkie@xxxxxxxxx>
• Re: flyvideo 3100 with saa713x mandrake 9.1
  • From: Wan Tat Chee <tcwan@xxxxxxxxx>
• Re: almost there...
  • From: "Christopher Biggs" <listjunkie@xxxxxxxxx>
• ffmpeg
  • From: Richard Bottoms <rbottoms@xxxxxxxxxxxxxxxxxx>
• Re: Capture using multiple tuner cards..
  • From: "Dane Kantner" <webmaster@xxxxxxxxxx>
• Video Capture: Here's what works
  • From: Richard Bottoms <rbottoms@xxxxxxxxxxxxxxxxxx>
• Re: DC10plus question
  • From: Ron Keller <rakeller@xxxxxxx>
• Re: frequency table
  • From: warren hrach <warren11@xxxxxxx>
• almost there...
  • From: Richard Bottoms <rbottoms@xxxxxxxxxxxxxxxxxx>
• Re: Capture using multiple tuner cards..
  • From: Geoff Shang <gshang@xxxxxxxxx>
• Capture using multiple tuner cards..
  • From: "Daitau" <daitau@xxxxxxxxxxx>
• /dev/video contents and MAKEDEV
  • From: "sting sting" <zstingx@xxxxxxxxxxx>

RSS