Just updated from 0.2.7 to 0.2.8 for my saa7134 based FlyVideo 3000 and the video somehow seems a lot softer. Anyone else got this. Also Audio locking appears to be a bit better, although I have to specify 5.5MHz range on the module parameters otherwise I have lots of problems. I'm based in New Zealand which uses B/G PAL with German Nicam. Nicam appears to lock a lot better, previously it wandered between Mono and Stereo a lot. Plus the overally quality of the image has improved. Until recently I tended to perform a lot of captures over composite in from a Nicam VCR source to make sure I had a solid picture and Stereo Audio. Now a couple of minor niggles 1 - Can we get a reasonable howto on using PCI based audio rather than using the sound card input for these devices. I still haven't got this working myself. 2 - Get the LIRC related GPIO patches included. 3 - An option to Force/Lock audio to the Stereo signal so if there are problems the tuner will try to re-acquire immediately. This might not be required with 0.2.8 as I haven't used this release in anger yet. Well I hope this release is stable as i'm off on holiday for 2 weeks and I plan on using ffmpegrec to capture a large number of shows while i'm away. Steve ===== -- If you listen very carefully you can sometimes hear the dolphins sing pinguellis@xxxxxxxxxxx __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com