On Sun, 2003-08-17 at 00:32, suriya mohan wrote: > Hi, > Now try with audiomux=0 instead of 1. > > Option audiomux=<0,1,2,3,4,5> is used to specify sound source ( > 0-Tuner, 1-Radio, 2-external, 3-internal,4- mute,5- stereo) . > for > example audiomux=0 specifies that audio input is from tuner to > sound > card.(refer > '/usr/src/linux/Documentation/video4linux/bttv/Sound-FAQ' > for more information) I've tried all the audiomux settings you mentioned, and none of them seem to have made any difference so far. still no audio when i try to tune the radio, or noise from static in xawtv. I used one of the utilities in the bttv/Sound-FAQ file you mentioned in windows, and captured a heap of output, although i'm not completely sure if the information is even correct: ### BtSpy Report ### General information: Name:prolink pixelview playtv pro pv-bt878p+ Chip: Bt878 , Rev: 0x00 Subsystem: 0xffffffff Vendor: Illegal/unknown Vendor ID Values to MUTE audio: Mute_GPOE : 0x01fe00 Mute_GPDATA: 0x013c00 Has TV Tuner: Yes TV_Mux : 2 TV_GPOE : 0x01fe00 TV_GPDATA: 0x001c00 Number of Composite Ins: 1 Composite in #1 Composite1_Mux : 3 Composite1_GPOE : 0x01fe00 Composite1_GPDATA: 0x005c00 Has SVideo: Yes SVideo_Mux : 3 SVideo_GPOE : 0x01fe00 SVideo_GPDATA: 0x005c00 Has Radio: Yes Radio_GPOE : 0x01fe00 Radio_GPDATA: 0x011c00 am i able to use this output in some fashion as options to the kernel modules or something? i'm kinda lost here. :) Andrew > With Regards, > S.Suriya Mohan. -- Andrew Pilley <ashridah@xxxxxxxxxxxxxxx>