Hey, I've recently been able to aquire a used (but working) TV/FM tuner card from a friend of mine, and I'm having a little trouble getting it completely working. The card, as suggested by the subject of the email, is the prolink pixelview PV-BT878P+, rev 2E, similar to the one shown in the picture linked to below, which is the 2F: http://home.t-online.de/home/gunther.mayer/bttv/Prolink_Pixelview_PV-BT878P_Rev.jpg Basically, i've got the card working, in that it can receive video, and i've tested it under windows, to make sure it can tune audio as well (well, FM audio), but i'm having trouble getting it to tune audio under linux, with the brooktree video4linux drivers that come with recent 2.4.x kernels. Basically, my conundrum is, that while the gallery page i grabbed the picture link mentions a card very similar to mine, it doesn't mention what settings i should use to get it working, so all i can get is video, not audio (via one of the composite inputs) I've tried all the phillips tuners mentioned in the CARDLIST file, but whenever i try to tune the FM radio (using the 'radio' program, or 'gradio' or 'fmtools, it doesn't matter which one) the program claims that it's tuned, and that i have stereo, but the audio plug at the back doesn't make a single sound. I'm not completely sure if i should be using card=50, 70 or 72 however, or if i need to specify the tuner explicitly, or if i just somehow have the volume on it turned down (gradio suggests i've got it at 100%) the tuner's markings (it's a phillips tuner as i mentioned before) are: 3139 147 13371L FM1216/PH hm SV22 9848 and the brooktree chipset used is bt878KHF 25878-12 C40108.6 9820 This is in australia, so it's definently a PAL card, and i'm pretty sure there isn't an eeprom on my model of the card, (basically, the missing chip in the picture linked is also missing on mine.) Can anyone give me a couple of tips as to where i should be looking to fix my lack-of-audio problem? i'm not completely sure what to try (it's definently loading the tuner driver via i2c in a few instances, and i've got btaudio loaded (although i'm fairly sure that's for capture, not tuning) i'm making sure that i set radio=1 as well. Thanks for any tips you can give me, Andrew Pilley -- Andrew Pilley <ashridah@xxxxxxxxxxxxxxx>
