Re: Probs with DC10Plus, xawtv and bigphysarea patch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



This is the dmesg output at debug =2 (debug=1 seemed to give less info).

i2c-algo-bit.o: i2c bit algorithm module
Linux video codec intermediate layer: v0.2
i2c-core.o: driver saa7110 registered.
i2c-core.o: driver adv7175 registered.
Zoran MJPEG board driver version 0.9.4
PCI: Found IRQ 5 for device 00:0b.0
PCI: Sharing IRQ 5 with 00:01.1
PCI: Sharing IRQ 5 with 00:01.6
MJPEG[0]: Zoran ZR36067 (rev 2) irq: 5, memory: 0xcfff5000
MJPEG[0]: subsystem vendor=0x1031 id=0x7efe
DC10plus[0]: Initializing i2c bus...
DC10plus[0]: i2c_client_register() - driver id = 22
i2c-core.o: client [saa7110[0]] registered to adapter [DC10plus[0]](pos. 0).
DC10plus[0]: i2c_client_register() - driver id = 48
i2c-core.o: client [adv7176[0]] registered to adapter [DC10plus[0]](pos. 1).
i2c-core.o: adapter DC10plus[0] registered as adapter 0.
DC10plus[0]: Initializing videocodec bus...
ZORAN: 1 card(s) found
DC10plus[0]: zr36057_init() - initializing card[0], zr=e78f2920
DC10plus[0]: enable_jpg(IDLE)
DC10plus[0]: interrupts received: GIRQ1:50 queue_state=0/0/0/0
DC10plus[0]: procfs entry /proc/zoran0 allocated. data=e78f2920

so i guess that the driver is not seeing the bigphysarea patch. how to i tell it to see it?

also where do I find a list of the parameters I can pass the driver??

thanks
macca

_________________________________________________________________
Hot chart ringtones and polyphonics. Go to http://ninemsn.com.au/share/redir/adTrack.asp?mode=click&clientID=174&referral=Hotmail_taglines_plain&URL=http://ninemsn.com.au/mobilemania/default.asp




[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux