On Sat, Jul 06, 2002 at 12:16:50PM -0400, Paul Check wrote: > > > Am I supposed to be able to get tv sound when es1371 is loaded? > > > > Sure if the audio cable goes from the bttv line-out to the soundcard > > line-in and you have unmuted and adjusted the line-in levels in the mixer. > > By "audio cable" you mean the connector from the back of the video card into the > lin-in hole, and not the cable inside the case that goes from the video card > into the board, right? Ah, you have an internal audio cable. Are you sure it's connected to the right place on the soundcard and the corresponding mixer setting is unmuted and the level adjusted? Many soundcards have multiple internal connectors like CD, AUX, Video. There should be a mixer setting for each of connector. Line-in mixer setting will only affect the signal coming from the external line-in connector. > I just want to make sure. There is a hole on the video > card labelled "audio"...I'm assuming this is the one you're talking about. That could be line-in or line-out. My Hauppauge WinTV has both. > Would plugging headphones directly in there work? I tired that with no luck > before. Then it might be line-in. -- Ville Syrjälä syrjala@xxxxxx http://www.sci.fi/~syrjala/
