> On Sat, Jul 06, 2002 at 12:16:50PM -0400, Paul Check wrote: > > > > Am I supposed to be able to get tv sound when es1371 is loaded? > > > > > > Sure if the audio cable goes from the bttv line-out to the soundcard > > > line-in and you have unmuted and adjusted the line-in levels in the mixer. > > > > By "audio cable" you mean the connector from the back of the video card into the > > lin-in hole, and not the cable inside the case that goes from the video card > > into the board, right? > > Ah, you have an internal audio cable. Are you sure it's connected to the > right place on the soundcard and the corresponding mixer setting is > unmuted and the level adjusted? Many soundcards have multiple internal > connectors like CD, AUX, Video. There should be a mixer setting for > each of connector. Line-in mixer setting will only affect the signal > coming from the external line-in connector. Well, I'm 100% sure that it is connected to the right place because I am getting sound. Remember that the only problem is that I'm not getting sound when I load and then unload es1371. Also, I can watch tv on Windows (I'm dual boot), so that also tells me it's connected correctly. Ok, perhaps I'm not seeing the right mixer setting, but ALL my buttons on unmuted (they are always that way when I bring up the mixer). FYI I'm using tkmixer. I have 12 settings: Vol, PCM, Spkr, Line, Mic, CD, PCM2, IGain, Line1, PhoneIn, PhoneOut, and Video. Perhaps tkmixer doesn't have all the things it should. I'm also getting some sound related warnings when I boot, but I never paid attention to them since the bttv sound does work, at least in the beginning before es1371 is loaded/unloaded. I'll go back to those warnings and look at different mixers and report back to you. I'm always wondering if I'm missing some module. Perhaps at some point I'll give you a detailed listing of the ones I have and that might help. Cheers, Paul
