Hi Philip, there is no easy solution to your problem, it could be hardware bug or a bug in xawtv, so try: 1) Does it work with vendors driver in Windows? 2) Does fine-tuning in xawtv help ? 3) Debug tuner.c: For the tuner=3 there is special code in tuner.c: case TUNER_PHILIPS_SECAM which should follow your tv standard selection in xawtv. Add printks to see if it triggers. Gunther Philip Dodd wrote: > > Just for the record, teletext on theses channels works fine, so I'm > (perhaps naively :-) ) starting to think it's either a "putting things > together" problem, or a "displaying things properly" problem. > > I am not yet, however, unsuscribing :-) > > Philip > > Philip Dodd wrote: > > Philip Dodd wrote: > > > >> > >> > > >> > - Start xawtv > >> > - Click on "tv norm" > >> > - Click on "secam" > >> > - Report if it works > >> > > >> > >> Done. It dosn't work. However, and this may be of use to some of you, > >> it appears to switch between green image and purple image..., though > >> sometimes the purple image goes green after a couple of seconds. > >> > > > > Is this definitely *not* a bttv/v4l problem? If it isn't I'll stop > > filling up your lists with it :-) > > > > It doesn't appear to be xawtv related cos zapping exhibits the same > > behaviour, and SECAM TVs pick up the signal just fine from this antenna. > > I've been doing a bit of reading (and IRC :-) ) and now know a > > little bit about the luma and chroma. It appears to get just one or the > > other - am I right? > > > > Like I said, just let me know if this is quite clearly not "a problem at > > your end", and I'll leave you alone! > > > > Thanks again to all who've helped, > > _______________________________________________ > Video4linux-list mailing list > Video4linux-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/video4linux-list
