Hi Brigitte!
I tried the 13 steps you outlined, but I've noticed some problems with
my dmesg output (step 11):
Linux video capture interface: v1.00
bttv: driver version 0.9.12 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 10 for device 0000:00:10.0
PCI: Sharing IRQ 10 with 0000:00:04.3
PCI: Sharing IRQ 10 with 0000:00:04.2
PCI: Sharing IRQ 10 with 0000:00:10.1
bttv0: Bt878 (rev 17) at 0000:00:10.0, irq: 10, latency: 64, mmio:
0xedbfd000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tuner: chip found @ 0xc0
tuner: type set to 33 (MT20xx universal)
tuner: microtune: companycode=3cbf part=42 rev=88
tuner: microtune MT2050 found, OK
registering 0-0060
tuner: type forced to 33 (MT20xx universal) [insmod]
tuner: type already set (33)
bttv0: registered device video0
bttv0: registered device vbi0
---
It seems to be missing the "tda9887: chip found @ 0x96" line, as well
as i2c finding MSP34xx...
I'm running a Pinnacle PCTV (that's what it says on the box), but it's
identified as the same as your card, so I don't know what's going on
there...
Can anyone help? I'm running a Gentoo 1.4 system, with the
gentoo-dev-sources installed (2.6.0 with some patches).
Thankyou very much!