Re: Pinnacle PCTV pro

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



I use the 0.7.107 driver and I don't remember seeing "PCI: Sharing IRQ 10 with 0000:00:xx.x" is there the possibility you have a IRQ conflict?

----- Original Message -----
From: Jeremy Higgs <jhiggs@xxxxxxxxxxxxxxxx>
Date: Tuesday, December 30, 2003 6:35 pm
Subject: Re: Pinnacle PCTV pro

> Hi Brigitte!
> 
> I tried the 13 steps you outlined, but I've noticed some problems 
> with 
> my dmesg output (step 11):
> 
> Linux video capture interface: v1.00
> bttv: driver version 0.9.12 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for capture
> bttv: Bt8xx card found (0).
> PCI: Found IRQ 10 for device 0000:00:10.0
> PCI: Sharing IRQ 10 with 0000:00:04.3
> PCI: Sharing IRQ 10 with 0000:00:04.2
> PCI: Sharing IRQ 10 with 0000:00:10.1
> bttv0: Bt878 (rev 17) at 0000:00:10.0, irq: 10, latency: 64, mmio: 
> 0xedbfd000
> bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 
> 11bd:0012bttv0: using: Pinnacle PCTV Studio/Rave [card=39,insmod 
> option]bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no
> bttv0: using tuner=33
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> tuner: chip found @ 0xc0
> tuner: type set to 33 (MT20xx universal)
> tuner: microtune: companycode=3cbf part=42 rev=88
> tuner: microtune MT2050 found, OK
> registering 0-0060
> tuner: type forced to 33 (MT20xx universal) [insmod]
> tuner: type already set (33)
> bttv0: registered device video0
> bttv0: registered device vbi0
> 
> ---
> 
> It seems to be missing the "tda9887: chip found @ 0x96" line, as 
> well 
> as i2c finding MSP34xx...
> 
> I'm running a Pinnacle PCTV (that's what it says on the box), but 
> it's 
> identified as the same as your card, so I don't know what's going 
> on 
> there...
> 
> Can anyone help? I'm running a Gentoo 1.4 system, with the 
> gentoo-dev-sources installed (2.6.0 with some patches).
> 
> Thankyou very much!
> 
> 
> --
> video4linux-list mailing list
> Unsubscribe video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list
> 




[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux