I just installed a Hauppauge WinTV card. bttv is failing to load and I don't see anything helpful in the syslog. any ideas? thanks. Mandrake 9.2 w/ Kernel 2.4.22-10mdk # modprobe i2c-core # modprobe i2c-algo-bit # modprobe videodev # modprobe v4l2-common # modprobe tuner # modprobe bttv card=2 radio=0 /lib/modules/2.4.22-10mdk/kernel/drivers/media/video/bttv.o.gz: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg modprobe: insmod /lib/modules/2.4.22-10mdk/kernel/drivers/media/video/bttv.o.gz failed modprobe: insmod bttv failed # tail -3 /var/log/syslog Dec 30 17:23:27 wn kernel: bttv: driver version 0.7.107 loaded Dec 30 17:23:27 wn kernel: bttv: using 4 buffers with 2080k (8320k total) for capture Dec 30 17:23:27 wn kernel: bttv: Host bridge is Silicon Integrated Systems [SiS] SiS 645xx # lsmod | egrep 'i2c|video|v4l|tune|bttv' tuner 11688 0 (unused) v4l2-common 4032 0 (unused) videodev 7936 0 i2c-algo-bit 8552 0 i2c-core 20484 0 [msp3400 tuner i2c-algo-bit] # lspci -v 00:0b.0 Multimedia video controller: Internext Compression Inc: Unknown device 0016 (rev 01) Subsystem: Hauppauge computer works Inc.: Unknown device 4009 Flags: bus master, medium devsel, latency 32, IRQ 3 Memory at f4000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Millennium G550 Dual Head DDR 32Mb Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at fc000000 (32-bit, prefetchable) [size=32M] Memory at ef800000 (32-bit, non-prefetchable) [size=16K] Memory at ef000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at fbfe0000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Capabilities: [f0] AGP version 2.0 |