Hello, I'm trying to get my Hauppauge WinTV USB to work under SuSE 8.2 (with SuSE kernel 2.4.20-4GB). usbvision-0.9.2 compiled only after I added the following lines to usbvision.h: #ifndef I2C_ALGO_USB #define I2C_ALGO_USB 0x170000 /* USB algorithm */ #endif Before that I only got compiler errors "I2C_ALGO_USB undefined". I found the #define above in some mail archive and added it without really knowing what it is good for. After that, everything compiled fine, but xawtv and KWinTV show only coloured snow. With usbvision parameter debug=3 I get the following output in /var/log/messages: i2c-core.o: i2c core module version 2.7.0 (20021208) i2c-algo-usb.o: i2c usb algorithm module USBVision: module init usb.c: registered new driver USBVision Video Capture USBVision: Hauppauge WinTv-USB III (PAL) FM Model 568 found USBVision Maxium ISO Packet Length:1023 USBVision USB Bandwidth Usage: 8Mbit/Sec usbvision_power_on (,,,,,,) saa7113: init_module i2c-algo-usb.o: hw routines for usbvision #0 registered. i2c-algo-usb.o: needed 3 retries for 72 i2c-algo-usb: NAK from device adr 0x24 msg #0 saa7113_read 0xC8 saa7113: status=c8 saa7113_read 0x11 saa7113: version=11 saa7113: attaching SAA7113 at 0x4a usbvision: device 0: i2c attach [saa7113] saa7113: attached to adapter usbvision #0 tuner: ignoring usbvision #0 i2c adapter [id=0x170000] usbvision_set_dram_settings: compressed Seems that I2C_ALGO_USB=0x170000 is not a good idea, and without i2c adapter it's probably not possible to set the frequency for the tuner. Any ideas ? Hans