Thx for this little howto:) I managed to compile the modules and it works fine. I played a little with irrecord and lircd_gpio debug and I found that the codes are exactly the same as for flyvideo98 (someone mantioned that already i think) so I hope it will work. This is my favorite mailing list, thank you all:) On Mon, Apr 14, 2003 at 08:07:46AM +1000, Andrew Worsley wrote: > > I too grabbed this code and tried installing it. After some effort I did > get it to work beautifully. > > I used lirc-0.7pre1, saa7134 drivers (needs gcc 3.X). > > From memory I had to stuff the saa7134-* files into saa7134 driver and hack > the generated Make.conf file and to compile this file as an extra part of > the saa7134 code. Even then I had to cut and paste the generated compile > line and remove a -nostdc flag inorder to get it compile. > > The gpio file I copied into the lirc gpio drivers directory and I think > just renamed the file so that it replaced the existing gpio driver file > with this one. I think it then compiled happily when I configured that > driver. > > Then I wasted a bit of time trying to get the flyvideo98 remote control > line working - never looked like working - but it was easy enough to > genereate the lircd.conf file from scratch using the irrecord program (of > lirc) and having enabled debug on the new saa7134 module. > > Sorry I forgot to bring in my generated lircd.conf file - I'm sure some one > else will post theirs by tomorrow but I will try to bring it in just in > case. > > I just have to say I love this mailing list, one week no IR support, a few > emails taking about the problem and next week or so and some working code. > > Thanks everyone, particularly David Atkinson - you made my week end ! > > Andrew Worsley > > BTW - I took code in the most recent posting by David > > > > > I've tried to test this driver but I have a few problems :( > > > > The saa7134-gpio.* files should be put in the saa7134 driver's > > directory? And if so how do I compile them? I tried to add saa7134-gpio > > to the Make.conf file, compilation was fine but at make install I got > > unresolved symbol for saa7134-gpio. > > I had troubles in the compilation (needed to remove the -nostdc option when > compiling this saa7134-gpio.c file). > > Perhaps you didn't take the most recent posting? > > > > > I guess the lirc_gpio_s.c should be put in the lirc source tree in > > drivers/lirc_gpio directory replacing the lirc_gpio.c file. Am I right? > > That's what I did. > > Also had to copy saa7134-gpio.h into lirc's include directory > > > > > > > -- > video4linux-list mailing list > Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe > https://listman.redhat.com/mailman/listinfo/video4linux-list -- Robert L. RAKSI -- The Microsoft of Borg: Patches Are Futile! --