On Wednesday 26 March 2003 07:12, Ignace Suy wrote: > If you have a pctv pro card, you will need at least version 0.7.105 of the > bttv software. Otherwise the card will not address the tuner at all. dmesg says: bttv: driver version 0.7.96 loaded So I suppose this could be a problem. however, last time I got bttv/xawtv working with most of my channels I doubt I had the required version (0.7.105). I suppose I can go through the process of recompiling the kernel. Simply replace the bttv drivers with which I compiled this 2.4.20 kernel with updated ones? > > then use ktv to scan the _entire_ band, not just the western european > channels. I did this, (scantv -a as Gerd recommended) but found only a few channels, and not very clear ones either. > OR (since you sem to use A2000) use the following .xawtv configuration file > with the right (finetunings). I tried your configuration files, and all that I got were a few channels with (most snow) and a vague signal. Also different channels, e.g. CNN on "national geographics". Also the main dutch channels (nederland 1, etc.) were not present. So the problem probably not lies in the xawtv or configurations, but in the tuner? it is detected as: bttv0: i2c attach [client=Philips PAL_I (FI1246 and compat,ok] i2c-core.o: client [Philips PAL_I (FI1246 and compat] registered to adapter [bt848 #0](pos. 1). -- Hugo "Azaghal" Ideler azaghal@xxxxxx - Quote: "Some cause happiness wherever they go; others, whenever they go." -- Oscar Wilde
