If you have a pctv pro card, you will need at least version 0.7.105 of the bttv software. Otherwise the card will not address the tuner at all. then use ktv to scan the _entire_ band, not just the western european channels. OR (since you sem to use A2000) use the following .xawtv configuration file with the right (finetunings). Regards, Ignace =========== .xawtv ====================== [global] ratio = 4:3 freqtab = Europe-west pixsize = 128 x 96 pixcols = 1 jpeg-quality = 75 keypad-ntsc = no keypad-partial = yes osd = yes osd-position = 30 , 20 use-wm-fullscreen = yes # [Station name] # capture = overlay | grabdisplay | on | off # input = Television | Composite1 | S-Video | ... # norm = PAL | NTSC | SECAM | ... # channel = # # fine = # (-128..+127) # key = keysym | modifier+keysym # color = # # bright = # # hue = # # contrast = # [defaults] group = main norm = pal input = television capture = over color = 49% contrast = 42% [Ned1] channel = E11 capture = on fine = -20 [Ned2] channel = E6 capture = on fine = 28 [Ned3] channel = E7 capture = on fine = 44 [RTL4] channel = E12 capture = on fine = -4 [RTL5] channel = SE11 capture = on fine = 12 [SBS6] channel = SE18 capture = on fine = -4 [Yorin] channel = SE12 capture = on fine = 28 [V8] channel = 46 capture = on fine = 12 [Net5] channel = SE17 capture = on fine = -20 [BBC1] channel = 60 capture = on fine = 12 [BBC2] channel = 61 capture = on fine = 12 [VRT1] channel = E9 capture = on fine = -52 [Canvas] channel = E10 capture = on fine = -36 [TMF] channel = SE19 capture = on fine = 12 [TheBox] channel = 32 capture = on fine = 12 [MTV] channel = 58 capture = on fine = 12 [CNN] channel = SE13 capture = on fine = 44 [BBCworld] channel = 56 capture = on fine = 12 [Euronews] channel = 28 capture = on fine = 12 [NatG] channel = 30 capture = on fine = 12 [Veronica] channel = 54 capture = on fine = 12 [AT5] channel = 26 capture = on fine = 12 [Salto1] channel = SE14 capture = on fine = 60 [Salto2] channel = SE16 capture = on fine = -36 [UPC-info] channel = E5 capture = on fine = 12 [TV5] channel = 33 capture = on fine = 12 [ARD1] channel = 52 capture = on fine = 12 [ZDF2] channel = 53 capture = on fine = 12 [RaiUno] channel = 27 capture = on fine = 12 [TVE] channel = 44 capture = on fine = 12 [TRT] channel = 41 capture = on fine = 12 [Video] channel = 35 capture = on fine = 12 =========== end ======================== On Tuesday 25 March 2003 23:43, Azaghal wrote: > Not sure if this is the apropriate mailinglist, but was the closest I could > find. > > I live in Waalre, Holland, and the channel frequencies here don't match > those in west-europe.list. Thus I added a frequency .list file, with > channel frequencies from my cable provider. The entries supplied by my > provider are in the form of: > Nederland 1, channel 11- , freq: 216,00 > Nederland 2, channel 6+ , freq: 184,00 > ... > TV5 Europe, s19+, 280,00 > ... > > I converted them to a .list format such as: > [11-] > freq = 216000 > > [6+] > freq = 184000 > > And even tried different versions to this such as: > > [11-] > freq = 215250 > > [6+] > freq = 183250 > > But to no success. When scanning for channels, it only finds ~4 channels > listed as unknown, and viewing them shows a very vage/weak channel. I've > installed xawtv/bttv/motv before and did the same process, which worked > mostly, but I had to format recently, and now I can't seem to reproduce the > process. > > I'm on debian unstable (I know, not a good idea), and have a miro PCTV pro > card, on a custom compiled kernel with bttv+tuner+etc. loaded as modules, > bttv with params card=1. /dev/radio works fine. As manual says tuner is > autodetected I've got no params set on tuner. > > I'm clueless where to resolve the problem to, an error of my .list file, > tuner misconfiguration, xawtv, ... ? > > Thanks!