Es schrieb Gerd Knorr: > > Mario Kless <mariokless@xxxxxx> writes: > > > First is that I'm not able to use the radio of my TV-card. From time to time > > it is possible to listen to it, but I can't reproduce under which > > circumstances this appears. > > That is one of the next things I plan to have a detailed look at, stay tuned :) > > > saa7134[0]/audio: audio carrier scan failed, using 5.500 MHz [default] > > Guess this happens because there is simply no station tuned. If so it > is harmless. Will probably disable that message at some point, but as > the latest tvaudio tweaks are just a few hours old I like the driver > being a bit more verbose on potential problems ... > Just making the experience on the md9717, that the volume on the input must be up to some level. (Thanks a lot for scanning now the CD input. On line in I often have one channel only caused by the hardware :) > > Second is the (known?) problem that the audio doesn't stop when I close any > > TV-application. The only possibilities to stop is to remove the saa7134 > > module or to start the radio application. This has maybe something to do with > > problem one. > > v4l1 or v4l2 API? v4l1 mute not working is a known problem. > > > Last problem is that xawtv starts always in overlay-mode although in my > > xawtvrc in /etc/X11 and ~ is set to: > > > > [defaults] > > capture = grabdisplay > > Confirmed. Oops. Must investigate ... > Yes. Have seen this too. > > BTW is it normal that saa7134 does not load tda9887 automatically? > > Yes. It should do that only for cards which need it, which isn't true > for all cards ... > pre-install saa7134 modprobe -k tda9887 post-remove saa7134 modprobe -r tda9887 #works now The saa7134 itself I still load manually. Greetings Hermann --
