Re: Pinnacle PCTV Pro scan/mono radio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Wed, 12 Mar 2003, Tamas Nyitrai wrote:

> - It seems to be that I can not scan for TV or radio channels it does
> not find any channels. Tuning manually is ok.

The question above is still open. :-) I can not scan.
Anyone had success with scantv or radio -i (or -s) using the newer
pinnacle pro card and tuner?

These are my modules settings:

options bttv card=52 radio=1 tuner=33
options tuner type=33
options msp3400 amsound=1 once=1

This is my kernel log output if it helps:

i2c-core.o: i2c core module
i2c-core.o: driver i2c tda9887 driver registered.
i2c-algo-bit.o: i2c bit algorithm module
Linux video capture interface: v1.00
bttv: driver version 0.7.105 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT8367 [KT266]
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:06.0, irq: 17, latency: 32, mmio: 0xdedfe000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: BT878(Pinnacle PCTV Studio Pr) [card=52,insmod option]
tda9887: probing bt848 #0 i2c adapter [id=0x10005]
tda9887: chip found @ 0x86
i2c-core.o: client [tda9887] registered to adapter [bt848 #0](pos. 0).
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... found
i2c-core.o: driver i2c msp3400 driver registered.
msp34xx: init: chip=MSP3410G-B11 +nicam +simple +radio
msp3410: daemon started
i2c-core.o: client [MSP3410G-B11] registered to adapter [bt848 #0](pos.
1).
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc0
tuner(bttv): type forced to 33 (MT2032 universal) [insmod]
tuner: type already set (33)
i2c-core.o: client [MT2032 universal] registered to adapter [bt848
#0](pos. 2).
MT2032: Companycode=4d54 Part=04 Revision=04
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0

Thanks,
Tamas





[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux