Hi, I'm trying to get my Pinnacle PCTV Rave card working on kernel: 2.4.19GB, I am getting video, but I only get 'snow' sound....I tried to connect to my video to ensure it wasn't because of a bad signal, and this just gave a high pitch wailing sound even though the video was clear. Below is my dmesg....pls help! many thanks, Manish Linux video capture interface: v1.00 i2c-core.o: i2c core module version 2.6.4 (20020719) i2c-algo-bit.o: i2c bit algorithm module version 2.6.4 (20020719) bttv: driver version 0.7.105 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is PCI device 1106:3099 bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 00:0b.0, irq: 5, latency: 32, mmio: 0xef002000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,insmod option] i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing... i2c-algo-bit.o:1 scl: 1 sda: 0 i2c-algo-bit.o:2 scl: 1 sda: 1 i2c-algo-bit.o:3 scl: 0 sda: 1 i2c-algo-bit.o:4 scl: 1 sda: 1 i2c-algo-bit.o: bt848 #0 passed test. i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no bttv0: using tuner=33 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea642 0,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c tda9887 driver registered. tda9887: probing bt848 #0 i2c adapter [id=0x10005] tda9887: chip found @ 0x86 i2c-core.o: client [tda9887] registered to adapter [bt848 #0](pos. 0). i2c-core.o: driver i2c TV tuner driver registered. tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc0 tuner: type set to 33 (MT2032 universal) MT2032: Companycode=4d54 Part=04 Revision=04 i2c-core.o: client [MT2032 universal] registered to adapter [bt848 #0](pos. 1). MT2032: Companycode=4d54 Part=04 Revision=04 bttv0: PLL: 28636363 => 35468950 .. ok bttv0: registered device video0 bttv0: registered device vbi0
