Christian Buchta wrote: > ----- Original Message ----- > From: "arakeis" <arakeis@xxxxxxx> > To: <video4linux-list@xxxxxxxxxx> > Sent: Monday, March 10, 2003 11:40 AM > Subject: freeze = bttv (bt878) + nvidia closed source + 2.4.21 + XFree86 > (overlay) > >>I've tried : >> * moving arount my TV card in different slot => nothing >> * adding triton1=1 in the bttv options in modules.conf => nothing >> * reduced / raised latency for the TV card from 32 to 248 => nothing >> >>I've seen on the v4l mailing list (I think) that knoppix works so I will >>try it tomorrow to confirm or infirm that. >> > > The freezing problem depends on the depth in XF86Config-v4. That is, 16 > (used by KNOPPIX) works but 24 leads to a freez in overlay mode as you > describe it (with both drivers Nvidia's and XFree's). Maybe it's a problem > with the Xserver (get an mtrr error after shutdown of the Xserver), maybe > not? The hardware should be okay since I experience no problems under XP. > > gc > Well, my default depth is set to 16, from XFree86.0.log : (**) NVIDIA(0): Depth 16 and I too get the all thing to work with overlay in W2K -- Arnaud - lost at the moment