Re: patch(bttv-0.7.103+snapshot): Radio on PCTVpro/Mt2032 works perfect now

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Sat, Feb 01, 2003 at 03:46:25AM +0100, Gunther Mayer wrote:
> Michael Pearce wrote:
> > Hi, I just bought a PCTV Pro today after
> 
> ...
>  > great picture and sound (using 0.7.102), but radio doesn't work
> > at all.
> 
> With this patch radio works perfectly here (PAL card tested, NTSC card should work too).
> 
> Note1:
> There is currrently a race condition left.
> When you don't get these two lines:
>   kernel: bttv tuner received pinnacle id 2
>   kernel: bttv tda9887 received pinnacle id 2
> report this fact (and workaround by "rmmod bttv; insmod bttv").
> 
> Note2:
> Patch is against http://bytesex.org/snapshot/
> Hopefully Gerd will make 104 soon.

There have been so many patches here now. Does this patch contian all
the recent patches?

> 
> Regards, Gunther
> 
> 

> diff -Nur bttv7-20030131.orig/driver/tda9887.c bttv7-20030131-mt2032_radio/driver/tda9887.c
> --- bttv7-20030131.orig/driver/tda9887.c	Tue Jan 28 21:29:07 2003
> +++ bttv7-20030131-mt2032_radio/driver/tda9887.c	Sat Feb  1 03:27:04 2003
> @@ -419,6 +419,7 @@
>  	{
>  		int *i = arg;
>  
> +		printk("bttv tda9887 received pinnacle id %d\n",*i);
>  		t->pinnacle_id = *i;
>  		tda9887_miro(t);
>  		break;
> diff -Nur bttv7-20030131.orig/driver/tuner.c bttv7-20030131-mt2032_radio/driver/tuner.c
> --- bttv7-20030131.orig/driver/tuner.c	Fri Jan 31 16:02:37 2003
> +++ bttv7-20030131-mt2032_radio/driver/tuner.c	Sat Feb  1 03:27:17 2003
> @@ -54,6 +54,7 @@
>  	unsigned int radio;
>  	unsigned int mode;            /* current norm for multi-norm tuners */
>  	unsigned int xogc;	     // only for MT2032
> +	unsigned int pinnacle_id;     // only for Pinnacle PCTVpro/MT2032 radio mode
>  };
>  
>  static struct i2c_driver driver;
> @@ -733,8 +734,14 @@
>  static void mt2032_set_radio_freq(struct i2c_client *c,int freq)
>  {               
>          int if2;
> +	struct tuner *t = (struct tuner*)c->data;
> +
> +        //if2=10700*1000; //  10.7MHz FM intermediate frequency
>  
> -        if2=10700*1000; //  10.7MHz FM intermediate frequency
> +	if(t->pinnacle_id == 3) // TDA9887 will generate 10.7 MHz IF lastly.
> +		if2=41300*1000; // radio must first go through NTSC SAW filter
> +	else
> +		if2=33300*1000; // ... through PAL SAW filter
>  
>  	// per Manual for FM tuning: first if center freq. 1085 MHz
>          mt2032_set_if_freq(c,freq* 1000*1000/16, 1085*1000*1000,if2,if2,if2);
> @@ -889,7 +896,17 @@
>  	case AUDC_SET_RADIO:
>  		t->radio = 1;
>  		break;
> -		
> +
> +	
> +	case AUDC_CONFIG_PINNACLE:
> +	{
> +		int *i = arg;
> +		printk("bttv tuner received pinnacle id %d\n",*i);
> +
> +                t->pinnacle_id = *i;
> +                break;
> +        }
> +	
>  	/* --- v4l ioctls --- */
>  	/* take care: bttv does userspace copying, we'll get a
>  	   kernel pointer here... */





[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux