Can't use radio on PCTV Pro

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Hi, I just bought a PCTV Pro today after reading various reviews, seeing it 
was quite high quality. I also check around the net for linux support, and it 
seemed to be supported by bttv

TV works fine, great picture and sound (using 0.7.102), but radio doesn't work 
at all.
After perusing this list's archives, I'e seen it suggested that passing 
simple=0 or simple=1 to msp3400 might work. It doesn't :P

Upon starting 'radio -f 105.7' I get about a quarter of a second of static, 
and then nothing. The dmesg output from this is

mt2032_set_if_freq rfin=400000000 if1=1090000000 if2=38900000 from=32900000 
to=39900000
mt2032: rfin=400000000 lo1=284 lo1n=35 lo1a=4 sel=3, lo1freq=1491000000
mt2032: rfin=400000000 lo2=200 lo2n=25 lo2a=0 num=1512 lo2freq=1052100000
spurcheck f1=1491000 f2=1052100  from=32900 to=39900
 spurtest n1=1 n2=-2 ftest=-613200
 spurtest n1=1 n2=-3 ftest=-1665300
 spurtest n1=1 n2=-4 ftest=-2717400
 spurtest n1=1 n2=-5 ftest=-3769500
 spurtest n1=2 n2=-3 ftest=-174300
 spurtest n1=2 n2=-4 ftest=-1226400
 spurtest n1=2 n2=-5 ftest=-2278500
 spurtest n1=3 n2=-4 ftest=264600
 spurtest n1=3 n2=-5 ftest=-787500
 spurtest n1=4 n2=-5 ftest=703500
mt2032 Reg.E=0x3e
mt2032 Reg.F=0x00
msp34xx: VIDIOCSFREQ
msp34xx: setvolume: mute=on 0:0  v=0x00 b=0x00
msp34xx: AUDC_SET_RADIO
msp34xx: switching to radio mode
msp3400: setmode: 2
msp34xx: setvolume: mute=on 65535:65535  v=0x00 b=0x00
msp34xx: AUDC_SET_INPUT(4)
msp3400: thread: wakeup
msp3400: thread: sleep
tuner: radio freq set to 105.68
mt2032_set_if_freq rfin=105687500 if1=1085000000 if2=10700000 from=10700000 
to=10700000
mt2032: rfin=105687500 lo1=227 lo1n=28 lo1a=3 sel=4, lo1freq=1191750000
mt2032: rfin=105687500 lo2=204 lo2n=25 lo2a=4 num=3140 lo2freq=1075361000
spurcheck f1=1191750 f2=1075362  from=10700 to=10700
 spurtest n1=1 n2=-2 ftest=-958974
 spurtest n1=1 n2=-3 ftest=-2034336
 spurtest n1=1 n2=-4 ftest=-3109698
 spurtest n1=1 n2=-5 ftest=-4185060
 spurtest n1=2 n2=-3 ftest=-842586
 spurtest n1=2 n2=-4 ftest=-1917948
 spurtest n1=2 n2=-5 ftest=-2993310
 spurtest n1=3 n2=-4 ftest=-726198
 spurtest n1=3 n2=-5 ftest=-1801560
 spurtest n1=4 n2=-5 ftest=-609810
mt2032 Reg.E=0x2e
mt2032 Reg.F=0x10
msp34xx: VIDIOCSFREQ
msp34xx: setvolume: mute=on 0:0  v=0x00 b=0x00
msp3400: thread: wakeup
msp3400: thread: sleep
msp34xx: VIDIOCGAUDIO
msp34xx: AUDC_SET_INPUT(1)
msp34xx: scart switch: in2 => 0
msp3400: FM-Radio setstereo: stereo
msp3400: setstereo final source/matrix = 0x20
msp34xx: VIDIOCSAUDIO
msp34xx: setvolume: mute=off 65535:65535  v=0x73 b=0x00
msp34xx: setbass: 32768 0x00
msp34xx: settreble: 32768 0x00
msp3400: FM-Radio setstereo: mono
msp3400: setstereo final source/matrix = 0x0
msp34xx: VIDIOCGAUDIO
msp34xx: AUDC_SET_INPUT(1)
msp34xx: VIDIOCSAUDIO
msp34xx: setvolume: mute=off 65535:65535  v=0x73 b=0x00
msp34xx: setbass: 32768 0x00
msp34xx: settreble: 32768 0x00
msp3400: FM-Radio setstereo: mono
msp3400: setstereo final source/matrix = 0x0
tuner: radio freq set to 105.68
mt2032_set_if_freq rfin=105687500 if1=1085000000 if2=10700000 from=10700000 
to=10700000
mt2032: rfin=105687500 lo1=227 lo1n=28 lo1a=3 sel=4, lo1freq=1191750000
mt2032: rfin=105687500 lo2=204 lo2n=25 lo2a=4 num=3140 lo2freq=1075361000
spurcheck f1=1191750 f2=1075362  from=10700 to=10700
 spurtest n1=1 n2=-2 ftest=-958974
 spurtest n1=1 n2=-3 ftest=-2034336
 spurtest n1=1 n2=-4 ftest=-3109698
 spurtest n1=1 n2=-5 ftest=-4185060
 spurtest n1=2 n2=-3 ftest=-842586
 spurtest n1=2 n2=-4 ftest=-1917948
 spurtest n1=2 n2=-5 ftest=-2993310
 spurtest n1=3 n2=-4 ftest=-726198
 spurtest n1=3 n2=-5 ftest=-1801560
 spurtest n1=4 n2=-5 ftest=-609810
mt2032 Reg.E=0x2e
mt2032 Reg.F=0x10
msp34xx: VIDIOCSFREQ
msp34xx: setvolume: mute=off 0:0  v=0x00 b=0x00
msp3400: thread: wakeup
msp3400: thread: sleep
msp34xx: VIDIOCGAUDIO
msp34xx: VIDIOCGAUDIO
msp34xx: VIDIOCGAUDIO
msp34xx: AUDC_SET_INPUT(4)
msp34xx: VIDIOCSAUDIO
msp34xx: setvolume: mute=on 65535:65535  v=0x00 b=0x00
msp34xx: setbass: 32768 0x00
msp34xx: settreble: 32768 0x00
msp3400: FM-Radio setstereo: mono
msp3400: setstereo final source/matrix = 0x0


When I start 'radio -q -f 105.7' I can hear static constantly, and the 
following dmesg output is given

mt2032_set_if_freq rfin=400000000 if1=1090000000 if2=38900000 from=32900000 
to=39900000
mt2032: rfin=400000000 lo1=284 lo1n=35 lo1a=4 sel=3, lo1freq=1491000000
mt2032: rfin=400000000 lo2=200 lo2n=25 lo2a=0 num=1512 lo2freq=1052100000
spurcheck f1=1491000 f2=1052100  from=32900 to=39900
 spurtest n1=1 n2=-2 ftest=-613200
 spurtest n1=1 n2=-3 ftest=-1665300
 spurtest n1=1 n2=-4 ftest=-2717400
 spurtest n1=1 n2=-5 ftest=-3769500
 spurtest n1=2 n2=-3 ftest=-174300
 spurtest n1=2 n2=-4 ftest=-1226400
 spurtest n1=2 n2=-5 ftest=-2278500
 spurtest n1=3 n2=-4 ftest=264600
 spurtest n1=3 n2=-5 ftest=-787500
 spurtest n1=4 n2=-5 ftest=703500
mt2032 Reg.E=0x3e
mt2032 Reg.F=0x00
msp34xx: VIDIOCSFREQ
msp34xx: setvolume: mute=on 0:0  v=0x00 b=0x00
msp34xx: AUDC_SET_RADIO
msp34xx: switching to radio mode
msp3400: setmode: 2
msp34xx: setvolume: mute=on 65535:65535  v=0x00 b=0x00
msp34xx: AUDC_SET_INPUT(4)
msp3400: thread: wakeup
msp3400: thread: sleep
tuner: radio freq set to 105.68
mt2032_set_if_freq rfin=105687500 if1=1085000000 if2=10700000 from=10700000 
to=10700000
mt2032: rfin=105687500 lo1=227 lo1n=28 lo1a=3 sel=4, lo1freq=1191750000
mt2032: rfin=105687500 lo2=204 lo2n=25 lo2a=4 num=3140 lo2freq=1075361000
spurcheck f1=1191750 f2=1075362  from=10700 to=10700
 spurtest n1=1 n2=-2 ftest=-958974
 spurtest n1=1 n2=-3 ftest=-2034336
 spurtest n1=1 n2=-4 ftest=-3109698
 spurtest n1=1 n2=-5 ftest=-4185060
 spurtest n1=2 n2=-3 ftest=-842586
 spurtest n1=2 n2=-4 ftest=-1917948
 spurtest n1=2 n2=-5 ftest=-2993310
 spurtest n1=3 n2=-4 ftest=-726198
 spurtest n1=3 n2=-5 ftest=-1801560
 spurtest n1=4 n2=-5 ftest=-609810
mt2032 Reg.E=0x2e
mt2032 Reg.F=0x10
msp34xx: VIDIOCSFREQ
msp34xx: setvolume: mute=on 0:0  v=0x00 b=0x00
msp3400: thread: wakeup
msp3400: thread: sleep
msp34xx: VIDIOCGAUDIO
msp34xx: AUDC_SET_INPUT(1)
msp34xx: scart switch: in2 => 0
msp3400: FM-Radio setstereo: stereo
msp3400: setstereo final source/matrix = 0x20
msp34xx: VIDIOCSAUDIO
msp34xx: setvolume: mute=off 65535:65535  v=0x73 b=0x00
msp34xx: setbass: 32768 0x00
msp34xx: settreble: 32768 0x00
msp3400: FM-Radio setstereo: mono
msp3400: setstereo final source/matrix = 0x0


Here is the relevant part of my /etc/modules.conf
# bttv stuff
alias char-major-81     videodev
alias char-major-81-0   bttv
options bttv            card=52 radio=1 bttv_verbose=2
options msp3400         simple=0 debug=2
options tuner           type=33 debug=2


Has anyone else had this particular problem with a PCTV Pro?
Any help would be greatly appreciated. You guys have done great work so far 
with bttv, I can watch TV perfectly on my PC now :) Just not radio...


--Michael Pearce





[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux