Gerd Knorr wrote:
I can't see any tuner-chip at the card, but I have only got the tuner to
work with tuner=33: "MT2032 universal", although I haven't tried all. I
actually got this tuner autodetected with some version of bttv, but in
the newest version, it detects 14:"Temic PAL_BG (4006FH5)", which
doesn't work at all.
??? according to the logs below the card got detected correctly and it
should have worked without the tuner insmod option too.
No. I think it detected it correctly (tuner=33) with the modules from
2.4.19-kernel, but after I upgraded to the -100-version, it detects
tuner=14, like the log below here when not specifying a tuner.
When I try listening to radio, I beleve I the first time after loading
the drivers get 1/4 of a second of radio sound, but after that, I hear
just noise. Changing the frequency only gives a click.
Will check next week ...
OK. Thanks.
I tried the detect-program in bttv-source, but then geth this is syslog:
"i2c-core.o: I2C adapter 40002: I2C level transfers not supported"
There are multiple i2c busses in your system, you have to pick the right
i2c character device ...
OK. Then I got this:
-------
marius:/usr/src/bttv-0.7.100/tools# ./detect -d /dev/i2c-2
0x80: msp34xx/tea6300 sound processor (error: Device or resource busy)
0x86: TDA9885/TDA9886/TDA9887 tv and sound demodulator (error: Device or
resource busy)
0xa0: eeprom (bt878, Hauppauge-848) (error: Device or resource busy)
0xa2: ??? (error: Device or resource busy)
0xa4: ??? (error: Device or resource busy)
0xa6: ??? (error: Device or resource busy)
0xc0: tuner (error: Device or resource busy)
-----
Not anything new there...
But I can't get the eeprom to work:
marius:/usr/src/bttv-0.7.100/tools# ./eeprom -d /dev/i2c-2
write addr /dev/i2c-2: Remote I/O error
Gerd
BTW, is there any SF-page or CVS for the bttv-driver?
***
Log without implicit tuner type specified:
***
i2c-algo-bit.o: i2c bit algorithm module
Linux video capture interface: v1.00
bttv: driver version 0.7.100 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
System Controller
bttv: Bt8xx card found (0).
PCI: Found IRQ 5 for device 00:0b.0
PCI: Sharing IRQ 5 with 00:07.2
PCI: Sharing IRQ 5 with 00:07.3
PCI: Sharing IRQ 5 with 00:0b.1
bttv0: Bt878 (rev 17) at 00:0b.0, irq: 5, latency: 32, mmio: 0xe3000000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: BT878(Pinnacle PCTV Studio Pr) [card=52,insmod option]
bttv0: i2c attach [client=EEPROM chip,ok]
i2c-core.o: client [EEPROM chip] registered to adapter [bt848 #0](pos. 0).
bttv0: i2c attach [client=EEPROM chip,ok]
i2c-core.o: client [EEPROM chip] registered to adapter [bt848 #0](pos. 1).
bttv0: i2c attach [client=EEPROM chip,ok]
i2c-core.o: client [EEPROM chip] registered to adapter [bt848 #0](pos. 2).
bttv0: i2c attach [client=EEPROM chip,ok]
i2c-core.o: client [EEPROM chip] registered to adapter [bt848 #0](pos. 3).
i2c-core.o: adapter bt848 #0 registered as adapter 2.
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
i2c-core.o: driver i2c tda9887 driver registered.
tda9887: ignoring SMBus Via Pro adapter at 5000 i2c adapter [id=0x40002]
tda9887: ignoring ISA main adapter i2c adapter [id=0x50000]
tda9887: probing bt848 #0 i2c adapter [id=0x10005]
tda9887: chip found @ 0x86
bttv0: i2c attach [client=tda9887,ok]
i2c-core.o: client [tda9887] registered to adapter [bt848 #0](pos. 4).
bttv0: using tuner=14
bttv0: i2c: checking for MSP34xx @ 0x80... found
i2c-core.o: driver i2c msp3400 driver registered.
msp34xx: init: chip=MSP3410G-B11, has NICAM support
msp3410: daemon started
bttv0: i2c attach [client=MSP3410G-B11,ok]
i2c-core.o: client [MSP3410G-B11] registered to adapter [bt848 #0](pos. 5).
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: ignoring SMBus Via Pro adapter at 5000 i2c adapter [id=0x40002]
tuner: ignoring ISA main adapter i2c adapter [id=0x50000]
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc0
tuner: type set to 14 (Temic PAL_BG (4006FH5))
bttv0: i2c attach [client=Temic PAL_BG (4006FH5),ok]
i2c-core.o: client [Temic PAL_BG (4006FH5)] registered to adapter [bt848
#0](pos. 6).
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
