My new Pinnacle PCTV PRO-card is working in windows, and sound
(stereo)/TV/tuning/recording (including sound) is working in linux using
bttv 0.7-100.
It seems like there are many different chips at these cards, but I have
seen the following chips at my card:
-Conexant Fusion 878A (this is probably working with bttv.o)
-MSP3410G (using MSP3400.o for this one without parameters)
-TDA 9886TS (using TDA9887.o for this)
others that I don't recognize, that is, I can't find any module for it
in bttv-package:
-TDA 1308 2D030
-CSI 24W0BI
-HCF 4052
I can't see any tuner-chip at the card, but I have only got the tuner to
work with tuner=33: "MT2032 universal", although I haven't tried all. I
actually got this tuner autodetected with some version of bttv, but in
the newest version, it detects 14:"Temic PAL_BG (4006FH5)", which
doesn't work at all.
I bought the card in europe (Norway) and is using PAL.
When I try listening to radio, I beleve I the first time after loading
the drivers get 1/4 of a second of radio sound, but after that, I hear
just noise. Changing the frequency only gives a click.
**********
Logs:
**********
I do:
modprobe bttv radio=1 bttv_debug=1 card=52 tuner=33
Linux video capture interface: v1.00
bttv: driver version 0.7.100 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
System Controller
bttv: Bt8xx card found (0).
PCI: Found IRQ 5 for device 00:0b.0
PCI: Sharing IRQ 5 with 00:07.2
PCI: Sharing IRQ 5 with 00:07.3
PCI: Sharing IRQ 5 with 00:0b.1
bttv0: Bt878 (rev 17) at 00:0b.0, irq: 5, latency: 32, mmio: 0xe3000000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: BT878(Pinnacle PCTV Studio Pr) [card=52,insmod option]
i2c-dev.o: Registered 'bt848 #0' as minor 2
i2c-core.o: adapter bt848 #0 registered as adapter 2.
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
i2c-core.o: driver i2c tda9887 driver registered.
tda9887: ignoring SMBus Via Pro adapter at 5000 i2c adapter [id=0x40002]
tda9887: ignoring ISA main adapter i2c adapter [id=0x50000]
tda9887: probing bt848 #0 i2c adapter [id=0x10005]
tda9887: chip found @ 0x86
bttv0: i2c attach [client=tda9887,ok]
i2c-core.o: client [tda9887] registered to adapter [bt848 #0](pos. 0).
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... found
i2c-core.o: driver i2c msp3400 driver registered.
msp34xx: init: chip=MSP3410G-B11, has NICAM support
msp3410: daemon started
bttv0: i2c attach [client=MSP3410G-B11,ok]
i2c-core.o: client [MSP3410G-B11] registered to adapter [bt848 #0](pos. 1).
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: ignoring SMBus Via Pro adapter at 5000 i2c adapter [id=0x40002]
tuner: ignoring ISA main adapter i2c adapter [id=0x50000]
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc0
tuner: type set to 33 (MT2032 universal)
MT2032: Companycode=4d54 Part=04 Revision=04
bttv0: i2c attach [client=MT2032 universal,ok]
i2c-core.o: client [MT2032 universal] registered to adapter [bt848
#0](pos. 2).
MT2032: Companycode=4d54 Part=04 Revision=04
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
***************************************
After that command the following modules have been loaded: "tuner
tvaudio msp3400 tda9887 bttv"
I tried the detect-program in bttv-source, but then geth this is syslog:
"i2c-core.o: I2C adapter 40002: I2C level transfers not supported"
and it says:
"0x5a: ??? (error: Device or resource busy)"
"eeprom" gives:
"write addr /dev/i2c-0: Function not implemented"
and the same error in syslog.
If these are neccesary, please give me a hint of how to make them work
(tried them both with and without drivers loaded)
Anyone that has this card working with the same chips?
I am willing to test patches/changes to source code (with good hints)
that might solve the problem, or provide more information if needed.
Marius K
