Re: Sound question maybe AVerTV Studio Deluxe related

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Ok, I tried tuner=27, card=27 tuner=2, and card=27 tuner=27.  I also 
pulled the sticker off and had a look, I found the following:

Philips
33139 134110C
FM1236/PH  hm
SV22 0205

If I had to pick one I'd guess that the tuner is and FM 1236/PH but I 
can't find any of these magic numbers in CARDLIST or Cards.  In any event 
tuner=2 makes the video work fine, tuner=27 seems to leave out a few 
stations, whatever that may indicate.  Any suggestions?  Any how does the 
audio look when its working?  What is the TVaudio/audio mixer device in 
/dev?  Could somebody post a commented ls -l showing these devices?

Andy Fundinger

On Sun, 28 Jul 2002, Bill Eldridge wrote:

> 
> My guess is you really need tuner=27 for this card.
> All the detection is pretty well dependent on getting
> the right card & tuner, and while sometimes it can
> autodetect, quite often it autodetects a wrong value.
> 
> Look under the label on your tuner for actual numbers
> and correlate them with the list in Tuners and see what
> you really have.
> 
> Andy Fundinger wrote:
> > 
> > Ok, I'm kind of confused about how the audio setup is supposed to work.  I
> > seem to have a module called tvaudio and one called tvmixer but I have no
> > corresponding devices.  How are the tv programs supposed to have access to
> > these drivers?  According to Cardlist the AVerTV Studio has a Tda9840
> > sound chip supported by tvaudio.  I can see tvaudio module loading but no
> > indication of it finding anything.  tvmixer says the Phillips NTSC has no
> > mixer.  I can get video through xawtv with modprobe bttv tuner=2 radio=1,
> > but no sound even bypassing the sound card.  I'm using bttv 0.7.94 against
> > a customized 2.4.18 kernel but I have not patched the kernel with the
> > bttv code, rather I've been compiling it separately.
> > 
> > Any suggestions?  Logs that would help diagnose this problem?  Is this a
> > card problem or did I miss a manual to read?  I have until Friday to
> > return the card if this can't be made to work.
> > 
> > Andy Fundinger
> > 
> > _______________________________________________
> > Video4linux-list mailing list
> > Video4linux-list@xxxxxxxxxx
> > https://listman.redhat.com/mailman/listinfo/video4linux-list
> 
> 








[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux