My guess is you really need tuner=27 for this card. All the detection is pretty well dependent on getting the right card & tuner, and while sometimes it can autodetect, quite often it autodetects a wrong value. Look under the label on your tuner for actual numbers and correlate them with the list in Tuners and see what you really have. Andy Fundinger wrote: > > Ok, I'm kind of confused about how the audio setup is supposed to work. I > seem to have a module called tvaudio and one called tvmixer but I have no > corresponding devices. How are the tv programs supposed to have access to > these drivers? According to Cardlist the AVerTV Studio has a Tda9840 > sound chip supported by tvaudio. I can see tvaudio module loading but no > indication of it finding anything. tvmixer says the Phillips NTSC has no > mixer. I can get video through xawtv with modprobe bttv tuner=2 radio=1, > but no sound even bypassing the sound card. I'm using bttv 0.7.94 against > a customized 2.4.18 kernel but I have not patched the kernel with the > bttv code, rather I've been compiling it separately. > > Any suggestions? Logs that would help diagnose this problem? Is this a > card problem or did I miss a manual to read? I have until Friday to > return the card if this can't be made to work. > > Andy Fundinger > > _______________________________________________ > Video4linux-list mailing list > Video4linux-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/video4linux-list -- Bill Eldridge Radio Free Asia bill@xxxxxxx
