Re: Re: Philips 7134 sound problem(?)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



> Hey there...         <( http://www.matthew2k.de.vu )>-=-<( powered by
> linux)>
> 
   
>    aumux: TV
> to
>    aumux: LINE2
Cool - that did the trick :)

>    
> in saa7134-cards.c in the FLYVIDEO3000 section. I have done that  and  I 
> get
> the following result: sound works for both, TV and radio *but* there are
> some
> strange side effects:
> 
>  * audio is activated as soon as the saa7134 module is being loaded
dito

>  * audio cannot be muted with xawtv or gnomeradio
nope - works fine, too (but my tv card is connected to "line 1" aka "aux" on
my sound card - so I presume, you have either to connect yours the same way
or to figure a way out to make xawtv & gnomeradio use the right mixer value
(with smix, you should be able to find out which is which :]

>  * audio in TV mode is only *mono* whereas the radio is stereo... changing
Hm - how can I chack that?

>    the mode in xawtv has no effect... *panic*
mode?

>  * audio volume is very faint - I have to bring up the volume of my line
> in
>    to 100%... using the mixer device of the saa7134 doesn't work well too,
>    because if I try to change the values, the slider just jumps to 100%
> and
>    doesn't move a bit anymore... no matter with what tool I try it. :(((
mine jumps to 50% :) but I assume there is no support yet to change mixer
settings on the TV board itself

> 
> And there are also two picture problems:
> 
>  * using the v4l support of X, my matrox card should scale the image up to
> the
>    current resolution - when I try that, the image is indeed scaled to the
> max
>    but it has the wrong aspect ratio (the image is squeezed in width and
> has a
>    corrupted bar right next to the picture)
mine won't scale to the max either (lots of black border in full sreen - but
I assume that's another issue
:)

> 
>  * grabdisplay in xawtv doesn't work at all - does that mean, grabbing is
> not
>    possible at the moment at all?
snapshot's totally black, all right :(


btw: I tried again the other trick using radio and xawtv at the same time
(consecutive use would remute the card up the point where I changed the line in
the driver's source) getting a funny result: I had indeed TV sound as soon
as radio started, but was unable to change the channel ;) 

THX again! :]

btw: Lycien's just a rpg character of mine - my name's Gregor.  ;)

-- 
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net





[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux