Matthias Dahl schrieb: > You can use a trick to at least get TV audio for the currently tuned in > program: start xawtv, tune to the program and after that, start the radio > tool delivered with xawtv. You will get the audio for the current program > but it will be in mono... and if you switch to a different channel, you've > to use the tool again to get audio. :(( here now a 2. trick:) On my redhat box I become only stereo-tv-sound after change or add any entry on modules.conf, I've save modules.conf and shutdown the system. After few sec. I push up the PC (coldstart) and the modprobe with the new modules.conf is done. Then I start xawtv, motion pictures and stereo-tv-sound comes up. I can switch the channel and get the right audio for the current channel. But I reboot (warmstart) the box now and start xawtv after that again, and the motion pictures are there but no audio. After coldstart seems to work, but dont with the warmstart. That is reproducible at my redhat box. I dont now on other distribution. I now, that isn't it. Gunther
