archivis wrote: > > > For card=58, the "pll" must be set: "insmod bttv pll=35 card=..." > > > > Otherwise send "dmesg|grep bttv" > > Thanks...unfortunately... > > I tried what you suggested and it didn't work. > > These are my current settings from /etc/modules.conf, re: bttv: > > alias char-major-81 bttv > options bttv card=58 pll=2 radio=0 > options tuner debug=1 > > I've tried tuners 8 and 6 (along with others), which I saw listed in the > archives for Phoebe cards. I'm at a tad of a loss as where to go next. > Well, obviously, or I wouldn't be here... > > dmesg|greb bttv: > bttv: driver version 0.7.62 loaded > bttv: using 2 buffers with 2080k (4160k total) for capture > bttv: Host bridge needs ETBF enabled. > bttv: Bt8xx card found (0). > bttv0: Bt878 (rev 2) at 00:0b.0, irq: 5, latency: 132, memory: > 0xfedfe000 > bttv0: subsystem: 144f:3000 => TView 99 (CPH063) => card=38 > bttv0: model: BT878(Phoebe TV Master Only () [insmod option] > bttv0: enabling ETBF (430FX/VP3 compatibilty) > bttv0: i2c: checking for MSP34xx @ 0x80... not found > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > bttv0: i2c attach [Temic NTSC (4036 FY5)] > bttv0: PLL: 35468950 => 28636363 ... ok > bttv0: PLL: switching off To get your external input working: Try "card=0", as external inputs are a generic feature of bt8x8 chips. Try all 4 settings for "video source" in xawtv. Try bttv-0.7.90 or later. What do you see (noise, black, blue or else)?
