> For card=58, the "pll" must be set: "insmod bttv pll=35 card=..." > > Otherwise send "dmesg|grep bttv" Thanks...unfortunately... I tried what you suggested and it didn't work. These are my current settings from /etc/modules.conf, re: bttv: alias char-major-81 bttv options bttv card=58 pll=2 radio=0 options tuner debug=1 I've tried tuners 8 and 6 (along with others), which I saw listed in the archives for Phoebe cards. I'm at a tad of a loss as where to go next. Well, obviously, or I wouldn't be here... dmesg|greb bttv: bttv: driver version 0.7.62 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). bttv0: Bt878 (rev 2) at 00:0b.0, irq: 5, latency: 132, memory: 0xfedfe000 bttv0: subsystem: 144f:3000 => TView 99 (CPH063) => card=38 bttv0: model: BT878(Phoebe TV Master Only () [insmod option] bttv0: enabling ETBF (430FX/VP3 compatibilty) bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c attach [Temic NTSC (4036 FY5)] bttv0: PLL: 35468950 => 28636363 ... ok bttv0: PLL: switching off I've tried with various installs of linux since the v.6.x drivers to get this working with my card, and it never has been quite right. If you can help me get this working I'll owe you a cookie or maybe a double-handfull of snow from my balcony...:)
