>From what I see, your card's detected, and you just need to change the TV input, which you can do in Xawtv with v4lctl -v 2 setinput next and scroll through your other inputs. Or am I missing someething here? archivis wrote: > > > For card=58, the "pll" must be set: "insmod bttv pll=35 card=..." > > > > Otherwise send "dmesg|grep bttv" > > Thanks...unfortunately... > > I tried what you suggested and it didn't work. > > These are my current settings from /etc/modules.conf, re: bttv: > > alias char-major-81 bttv > options bttv card=58 pll=2 radio=0 > options tuner debug=1 > > I've tried tuners 8 and 6 (along with others), which I saw listed in the > archives for Phoebe cards. I'm at a tad of a loss as where to go next. > Well, obviously, or I wouldn't be here... > > dmesg|greb bttv: > bttv: driver version 0.7.62 loaded > bttv: using 2 buffers with 2080k (4160k total) for capture > bttv: Host bridge needs ETBF enabled. > bttv: Bt8xx card found (0). > bttv0: Bt878 (rev 2) at 00:0b.0, irq: 5, latency: 132, memory: > 0xfedfe000 > bttv0: subsystem: 144f:3000 => TView 99 (CPH063) => card=38 > bttv0: model: BT878(Phoebe TV Master Only () [insmod option] > bttv0: enabling ETBF (430FX/VP3 compatibilty) > bttv0: i2c: checking for MSP34xx @ 0x80... not found > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > bttv0: i2c attach [Temic NTSC (4036 FY5)] > bttv0: PLL: 35468950 => 28636363 ... ok > bttv0: PLL: switching off > > I've tried with various installs of linux since the v.6.x drivers to get > this working with my card, and it never has been quite right. If you > can help me get this working I'll owe you a cookie or maybe a > double-handfull of snow from my balcony...:) > > _______________________________________________ > Video4linux-list mailing list > Video4linux-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/video4linux-list -- Bill Eldridge Radio Free Asia bill@xxxxxxx
