Nathan Odle schrieb: > Capture Card: > Leadtek Winfast 2000 XP (bt878a) > > The first frame or two is filled with > static (no antenna > set up) and then it inexplicably begins to get > progressively > "compressed" up into the top 1/3 of the window. This is correct behaviour when you haven't tuned in to a tv channel. > Switching the input to > Composite or S-Video creates the same effect with > whatever video is > being input. On C-Vid or S-Vid the screen should be blue when no signal. Does it on your setup ? These inputs on bt878 are very generic, so you probably used some wrong module options. > I have also tried all the insmod options (ALL of them, > including "pll=") > with the bttv driver, with no luck at all. The card should be autodetected without any options. Try: - rmmod bttv; insmod bttv bttv_gpio=1 - anyway send "dmesg" output filtered for "bttv" and "tuner" Gunther
