Hi Gunther, To answer your questions: -Which PV-BT878 Revision is your card? PV-BT878P+(Rev.9D) - Is your card already shown on http://home.t-online.de/home/gunther.mayer/bttv/bttv-gallery.html ? Yes. - Do you habe a daugther board installed? No. - Write down the chip ids on your card, and tuner model. Writings on the chip: CONEXANT FUSION 878A 25878-13 E157865.1 0139 TAIWAN Writings on the label over PHILIPS tuner: 3139 147 13291# FI1216 Mk2/PH hm SV24 0141 - Send "dmesg", "bttv-0.7.98/tools/detect" and "bttv-0.7.98/tools/eeprom" (this shows what chips are detected by bttv) "dmesg" output:- bttv: driver version 0.7.83 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge is PCI device 8086:1237 bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 00:0a.0, irq: 11, latency: 132, memory: 0xfedfd000 bttv0: using: BT878(PixelView PlayTV pro) [card=37,insmod option] bttv0: enabling ETBF (430FX/VP3 compatibilty) i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing... i2c-algo-bit.o:1 scl: 1 sda: 0 i2c-algo-bit.o:2 scl: 1 sda: 1 i2c-algo-bit.o:3 scl: 0 sda: 1 i2c-algo-bit.o:4 scl: 1 sda: 1 i2c-algo-bit.o: bt848 #0 passed test. i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0xc2 bttv0: i2c attach [client=Philips PAL,ok] i2c-core.o: client [Philips PAL] registered to adapter [bt848 #0](pos. 0). I cannot run "bttv-0.7.98/tools/detect" and "bttv-0.7.98/tools/eeprom" even after "insmod i2c-dev". The programs complained that /dev/i2c-0 is not found. Do I need to create the device file myself? Any clues from the info so far? Regards, Reg > > From: Gunther.Mayer@xxxxxxxxxxx (Gunther Mayer) > Date: Sat 28/Sep/2002 20:04 CEST > To: video4linux-list@xxxxxxxxxx > Subject: Re: PixelView PlayTV Pro with Noisy Audio > > reg@xxxxxxxxxxxxxxxxxxxx wrote: > > > > Hi, > > > > I have installed PixelView PlayTV Pro on my machine. After I have scanned the > > channels in kwintv/motv, the channels I have got have great pictures but noisy > > audio (mainly noise with tiny original program audio). When I tried to fine tune > > the channels, I found out that if I increase the frequency by 2 MHz, I will get > > very clear audio but no picture. It looks like that the video and the audio > > are at different frequencies. Does anyone come across this problem? Is there > > problem with my TV tuner? I am using SuSE 8.0 (2.4.18 kernel) and bttv that comes > > with it. > > Pixelview has lots of hardware variations. > To resolve your problem we first need to know your exact model and hardware. > > So, > - Which PV-BT878 Revision is your card? > - Is your card already shown on http://home.t-online.de/home/gunther.mayer/bttv/bttv-gallery.html ? > Do you habe a daugther board installed? > - Write down the chip ids on your card, and tuner model. > - Send "dmesg", "bttv-0.7.98/tools/detect" and "bttv-0.7.98/tools/eeprom" > (this shows what chips are detected by bttv) > > > > _______________________________________________ > Video4linux-list mailing list > Video4linux-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/video4linux-list > > _______________________________________________________________________ Freeserve AnyTime, only £13.99 per month with one month's FREE trial! For more information visit http://www.freeserve.com/time/ or call free on 0800 970 8890
