Vlad Bosinceanu wrote: > > --- Wesley J Landaker <wjl@xxxxxxxxxxxxx> wrote: > > On Saturday 07 September 2002 12:08 pm, Gunther > > Mayer wrote: > > > Hi, > > > this patch makes the PAL variant work perfectly > > (NTSC and SECAM > > > should work, but untested). The missing point was, > > we need to set OP2 > > > on TDA9886, else MT2032 would be disabled after > > loading tda9887.o > > > (thanks to Barry for pinpointing this failure > > mode). > > > > > With this patch everything will work > > out-of-the-box (modulo bugs:-) > > > - MT2032 is detected automatically > > > - tda9885/6 is detected and module is loaded > > automatically > > > - Pal/Secam/Ntsc will automatically follow your > > selection in xawtv > > > > Wow, great work, Gunther! I had started to poke > > around at the TDA9885 > > myself, but you've already got it integrated! > > > > I tried applying this patch, and indeed, it does fix > > quite a lot of the > > problems I was seeing. Now autodetection seems to be > > working great and > > contact with the MT2032 no longer drops out. =) > > > > Unfortunately, I'm still not getting sound. I'm > > seeing the same behavior > > as I did the last time, where only video comes in, > > but if I use xawtv > > "fine-tune" to about (9) or (10), sound comes (of > > course, accompanied > > by fuzzy video ;) > > Hmm, just tried finetuning and I experience the same > thing. I get sound when i finetune to 12+ Summary: Val PAL: sound OK on finetune +12 Wesley NTSC: sound OK on finetune ca. +10 Gunther PAL-BG, msp3410g: sound fine Do you have a "msp34xx" on your cards? Alternatively sound could come from tda988x. Send "bttv-latest/tools/detect" and "bttv-latest/tools/eeprom". Oh, and try: "insmod msp3400 simple=0", this did help on Voodoo 200 some times ago...
