On Sun, 13 May 2001, Gunther Mayer wrote: > > > I wrote: > > > > ... I'm having no success making v4l/bttv work at all with a Hauppage "WinTV Go" > WinTV Go Model 603 works fine here. > What does "dmesg" say when you load your bttv module? while modprobing: i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-algo-bit.o: i2c bit algorithm module Linux video capture interface: v1.00 bttv: driver version 0.7.63 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 00:11.0, irq: 11, latency: 32, memory: 0xe5001000 bttv0: subsystem: 0070:13eb => Hauppauge WinTV => card=10 bttv0: model: BT878(Hauppauge new (bt878)) [autodetected] bttv0: enabling ETBF (430FX/VP3 compatibilty) bttv0: Hauppauge msp34xx: reset line init i2c-dev.o: Registered 'bt848 #0' as minor 0 i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: Hauppauge eeprom: model=44001, tuner=Philips FI1236 MK2 (2), radio=no bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found i2c: initialized Then, when running xawtv, this repeats at about one "aiee" per second: bttv0: PLL: 28636363 => 35468950 ... ok bttv0: irq: SCERR risc_count=03546808 bttv0: irq: SCERR risc_count=03546808 bttv0: irq: SCERR risc_count=03546808 bttv0: irq: SCERR risc_count=03546808 bttv0: irq: SCERR risc_count=03546808 bttv0: aiee: error loops bttv0: PLL: switching off bttv0: resetting chip bttv0: irq: SCERR risc_count=03546808 bttv0: irq: SCERR risc_count=03546808 bttv0: irq: SCERR risc_count=03546808 bttv0: irq: SCERR risc_count=03546808 bttv0: irq: SCERR risc_count=03546808 bttv0: aiee: error loops Other random info: - Hauppage "WinTV-Go model 190" board, with Conexant-logo '878 chip - bttv-0.7.63 driver - xawtv-3.43 - Redhat 6.2, XFree upgraded to 4.0.2. - 2.2.19 kernel built from RedHat's upgrade for 6.2, "kernel-2.2.19-6.2.1.src.rpm" (this kernel rpm comes pre-patched with (some version of) the "new" i2c driver) - ABIT ZM6 motherboard, Celeron CPU, Intel 440BX/ZX 82443BX/ZX chipset - video source is an NTSC composite color camera Any advice or suggestions would be greatly appreciated! Steve -- Steve Tell tell@xxxxxxxxxxxxxxx
