Am 06.12.2003 22:06:54 schrieb(en) Brett Gersekowski:
I didn't patch the kernel. I dowloaded one of the video4linux
snapshots from
http://bytesex.org and compiled them separately as modules. My patch
was
made against the 20031204 snapshot.
I don't understand how to use the snapshot...
I tried the following:
Installed the Kernel (reboot afterwards), compiled and installed the
source, recompiled the kernel and reboot again.
Now I get from dmesg:
bttv: driver version 0.9.12 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 4, latency: 64, mmio:
0xcddfe000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,insmod option]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,
tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
tda9887: chip found @ 0x86
registering 0-0043
tuner: chip found @ 0xc0
tuner: type set to 33 (MT2032 universal)
MT2032: Companycode=3cbf Part=42 Revision=24
MT2032 hexdump:
42 24 20 c1 00 18 e4 77 29 04 85 04 88 60 f0 05
24 3c bf 42 24
not a MT2032.
registering 0-0060
MT2032: Companycode=3cbf Part=42 Revision=24
MT2032 hexdump:
42 24 20 c1 00 18 e4 77 29 04 85 04 88 60 f0 05
24 3c bf 42 24
not a MT2032.
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
So, my card is really the Pinnacle PCTV Rave card. Zoran Davidovac
from the kernel mailing list told me, that the RED pinnacle PCTV card
hats the MT2050 inside.
So what next?
Thanks,
Martin
