Please send output of
bttv-0.7.xxx/tools/detect and .../eeprom
I assume the tda988x or similar on your card is at i2c-address 0x96,
but this address is hogged falsely by PV951:
- mv away "tvaudio.o" from /lib/modules/`uname -r`/...
- change 0x86 to 0x96 for this line in "tda9887.c"
static unsigned short normal_i2c_range[] = {0x86>>1,0x86>>1,I2C_CLIENT_END};
Does it work?
3xd176o02@xxxxxxxxxxxxxx wrote:
On Tue, Dec 02 2003 at 06:04:42pm +0100, Gunther.Mayer-at-t-online.de (Gunther Mayer) |v4l| wrote:
Hi,
Hi again
which card is this ?
It is a Pinnacle PCTV Pro (red card)
Can you send more "dmesg" output ?
after modprobe tuner debug=1 and modprobe bttv
i2c-core.o: driver i2c TV tuner driver registered.
bttv: driver version 0.7.107 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
bttv: Host bridge is VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
bttv: Bt8xx card found (0).
PCI: Found IRQ 10 for device 00:08.0
PCI: Sharing IRQ 10 with 00:08.1
PCI: Sharing IRQ 10 with 00:0c.0
bttv0: Bt878 (rev 17) at 00:08.0, irq: 10, latency: 32, mmio: 0xe3008000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected]
msp34xx: init: chip=MSP3410G-B11 +nicam +simple +radio
msp3410: daemon started
i2c-core.o: client [MSP3410G-B11] registered to adapter [bt848 #0](pos. 0).
tvaudio: found pic16c54 (PV951) @ 0x96
i2c-core.o: client [pic16c54 (PV951)] registered to adapter [bt848 #0](pos. 1).
tuner: chip found @ 0xc0
i2c-core.o: client [(tuner unset)] registered to adapter [bt848 #0](pos. 2).
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
bttv0: using tuner=33
tuner: pinnacle pal
tuner: type set to 33 (MT2032/MT2050)
tuner: MT2050 detected.
tuner: MT20xx hexdump:
42 8f 1c cb 66 63 10 88 29 09 85 99 e3 96 f0 14
24 3c bf 42 8f
mt2050 sro is 96
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
and after trying to tune in to a channel:
tuner: tv freq set to 189.25
mt2050_set_if_freq freq=189250000
lo1 lo2 = 351 294
num1 num2 div1a div1b div2a div2b= 3 b66 1c 3 23 6
bufs is: 1 8f 1c cb 66 63
Regards, Gunther
Kind Regards, Daniel
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
