Hi ,
Here are my kernel messages : it seem that i have no TDA9875
I am trying to get french channels (SECAM) but tvscan (xawtv) find no
channels.
i2c-core.o: i2c core module version 2.8.0 (20030714)
Linux video capture interface: v1.00
bttv: driver version 0.7.107 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
bttv: Host bridge needs ETBF enabled.
bttv: Bt8xx card found (0).
PCI: Enabling device 00:0e.0 (0000 -> 0002)
bttv0: Bt878 (rev 17) at 00:0e.0, irq: 18, latency: 132, mmio: 0xfedfe000
bttv0: using: BT878(Hercules Smart TV Stere) [card=100,insmod option]
bttv0: enabling ETBF (430FX/VP3 compatibilty)
bttv0: using tuner=5
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951),ta8874z
tvaudio: found pic16c54 (PV951) @ 0x96
tuner: chip found @ 0xc0
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
btaudio: driver version 0.7 loaded [digital+analog]
PCI: Enabling device 00:0e.1 (0000 -> 0002)
btaudio: Bt878 (rev 17) at 00:0e.1, irq: 18, latency: 64, mmio: 0xfedfd000
btaudio: using card config "default"
btaudio: registered device dsp2 [digital]
btaudio: registered device dsp3 [analog]
btaudio: registered device mixer1
Roger Oberholtzer wrote:
On Mon, 2003-12-01 at 19:00, Jave wrote:
Hi,
I am trying to setup bttv to use my Hercules Smart Tv (not stéréo) under
Linux without success.
I found that Hercules Smart Tv Stéréo card is supported as card 100 and
tuner 5 but it apparently this card is not the same as mine which as not
the stéreo option.
Has somebody already tryied this card with success ?
I posted questions like this a while back without answer. Well, one kind
soul tried. But happy though I was to get a response, I already knew the
suggestions.
I can get mine show images with, say, xawtv. But no sound. Other than
static. Mine is the Stereo version.
My system prints the attachment's listing when modules are loaded. All
looks ok. But no sound. I tried:
OSS
ALSA
TVAUDIO
No difference. I checked the output of the card's speaker connection
when trying OSS and ALSA. When I tried TVAUDIO, a new mixed showed up in
ALSA, but still no sound. Just static.
How does your module loading trace statements compare to these?
------------------------------------------------------------------------
Linux video capture interface: v1.00
bttv: driver version 0.7.107 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (MCH)
bttv: Bt8xx card found (0).
PCI: Found IRQ 10 for device 02:08.0
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 02:08.1
bttv0: Bt878 (rev 17) at 02:08.0, irq: 10, latency: 64, mmio: 0xf2001000
bttv0: using: BT878(Hercules Smart TV Stere) [card=100,insmod option]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: using tuner=5
bttv0: i2c: checking for TDA9875 @ 0xb0... found
i2c-core.o: driver i2c tda9875 driver registered.
tda9875: no such chip at 0xb0 (dic=0x11 rev=0x2)
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
i2c-core.o: driver generic i2c audio driver registered.
tvaudio: found pic16c54 (PV951) @ 0x96
i2c-core.o: client [pic16c54 (PV951)] registered to adapter [bt848 #0](pos. 0).
tvaudio: found tda9874a.
tvaudio: found tda9874h/a @ 0xb0
i2c-core.o: client [tda9874h/a] registered to adapter [bt848 #0](pos. 1).
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc0
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
i2c-core.o: client [Philips PAL_BG (FI1216 and comp] registered to adapter [bt848 #0](pos. 2).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
btaudio: driver version 0.7 loaded [digital+analog]
PCI: Found IRQ 10 for device 02:08.1
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 02:08.0
btaudio: Bt878 (rev 17) at 02:08.1, irq: 10, latency: 64, mmio: 0xf2000000
btaudio: using card config "default"
btaudio: registered device dsp0 [digital]
btaudio: registered device dsp1 [analog]
btaudio: registered device mixer0
