On Mon, 2003-12-01 at 19:00, Jave wrote: > Hi, > > I am trying to setup bttv to use my Hercules Smart Tv (not stéréo) under > Linux without success. > > I found that Hercules Smart Tv Stéréo card is supported as card 100 and > tuner 5 but it apparently this card is not the same as mine which as not > the stéreo option. > > Has somebody already tryied this card with success ? I posted questions like this a while back without answer. Well, one kind soul tried. But happy though I was to get a response, I already knew the suggestions. I can get mine show images with, say, xawtv. But no sound. Other than static. Mine is the Stereo version. My system prints the attachment's listing when modules are loaded. All looks ok. But no sound. I tried: OSS ALSA TVAUDIO No difference. I checked the output of the card's speaker connection when trying OSS and ALSA. When I tried TVAUDIO, a new mixed showed up in ALSA, but still no sound. Just static. How does your module loading trace statements compare to these?
Linux video capture interface: v1.00 bttv: driver version 0.7.107 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (MCH) bttv: Bt8xx card found (0). PCI: Found IRQ 10 for device 02:08.0 PCI: Sharing IRQ 10 with 00:1f.3 PCI: Sharing IRQ 10 with 02:08.1 bttv0: Bt878 (rev 17) at 02:08.0, irq: 10, latency: 64, mmio: 0xf2001000 bttv0: using: BT878(Hercules Smart TV Stere) [card=100,insmod option] i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: using tuner=5 bttv0: i2c: checking for TDA9875 @ 0xb0... found i2c-core.o: driver i2c tda9875 driver registered. tda9875: no such chip at 0xb0 (dic=0x11 rev=0x2) bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z i2c-core.o: driver generic i2c audio driver registered. tvaudio: found pic16c54 (PV951) @ 0x96 i2c-core.o: client [pic16c54 (PV951)] registered to adapter [bt848 #0](pos. 0). tvaudio: found tda9874a. tvaudio: found tda9874h/a @ 0xb0 i2c-core.o: client [tda9874h/a] registered to adapter [bt848 #0](pos. 1). i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0xc0 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) i2c-core.o: client [Philips PAL_BG (FI1216 and comp] registered to adapter [bt848 #0](pos. 2). bttv0: PLL: 28636363 => 35468950 .. ok bttv0: registered device video0 bttv0: registered device vbi0 btaudio: driver version 0.7 loaded [digital+analog] PCI: Found IRQ 10 for device 02:08.1 PCI: Sharing IRQ 10 with 00:1f.3 PCI: Sharing IRQ 10 with 02:08.0 btaudio: Bt878 (rev 17) at 02:08.1, irq: 10, latency: 64, mmio: 0xf2000000 btaudio: using card config "default" btaudio: registered device dsp0 [digital] btaudio: registered device dsp1 [analog] btaudio: registered device mixer0