On Monday 23 June 2003 07:58, Richard Bottoms wrote: >I've seen recent requests for help on this but no step by step > solutions. I have Red Hat 8.0, kernel 2.4.18 and a dc10+ card. > Could someone detail what I need to do to get the card working. > >Here is the slightly edited dmesg output: > >Linux version 2.4.18-14 (bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc > version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 > 13:35:50 EDT 2002 BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000002000000 (usable) > BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) >0MB HIGHMEM available. >32MB LOWMEM available. This, generally speaking, isn't enough memory to do video. Buffering requirements for the filesystem alone will eat that up. I have no problems with half a gig, but no idea where the border case may be. >On node 0 totalpages: 8192 >zone(0): 4096 pages. >zone(1): 4096 pages. >zone(2): 0 pages. >Kernel command line: auto BOOT_IMAGE=linux ro >BOOT_FILE=/boot/vmlinuz-2.4.18-14 root=LABEL=/ >Initializing CPU#0 >Detected 334.103 MHz processor. This may also be too slow. I didn't have a lot of luck with a 400mhz K6-II, but found the mobo hardware (5 year old via stuff) wasn't spot on and moved to a different, much faster machine. >i2c: initialized >Linux video capture interface: v1.00 >Zoran ZR36060 + ZR36057/67 MJPEG board driver version 0.7 >PCI: Found IRQ 11 for device 00:0a.0 >MJPEG[0]: Zoran ZR36067 (rev 2) irq: 11, memory: 0xefffe000 >MJPEG[0]: subsystem vendor=0x1031 id=0x7efe >MJPEG[0]: Changing PCI latency from 64 to 32. >MJPEG[0]: Initializing i2c bus... >adv7176_attach: adv7176 rev. 1 at 0x56 >DC10plus[0] card detected >DC10plus[0]: Zoran ZR36060 (rev 1) >MJPEG: 1 card(s) found >MJPEG: using 2 V4L buffers of size 128 KB >Enabling Natoma workaround. >DC10plus[0]: Initializing card[0], zr=c28b1080 >DC10plus[0]: Testing interrupts... >DC10plus[0]: interrupts received: GIRQ1:60 queue_state=0/0/0/0 >DC10plus[0]: procfs entry /proc/zoran0 allocated. data=c28b1080 >DC10plus[0]: kmalloc for V4L bufs failed >DC10plus[0]: zoran_open: v4l_fbuffer_alloc failed >DC10plus[0]: kmalloc for V4L bufs failed >DC10plus[0]: zoran_open: v4l_fbuffer_alloc failed >Here is the modules.conf: > >alias parport_lowlevel parport_pc >alias eth0 3c59x >alias char-major-81 zr36067 >options zr36067 default_norm=0 lock_norm=0 pass_through=1 >pre-install zr36067 (modprobe saa7110;modprobe adv7175) >alias usb-controller usb-uhci > > >I can pay for the help. This is a very urgent need. I am on >http://www.scriptlance.com as computerplanet. > > >Thanks, >r.b. -- Cheers, Gene AMD K6-III@500mhz 320M Athlon1600XP@1400mhz 512M 99.26% setiathome rank, not too shabby for a WV hillbilly Yahoo.com attornies please note, additions to this message by Gene Heskett are: Copyright 2003 by Maurice Eugene Heskett, all rights reserved.
