I've seen recent requests for help on this but no step by step solutions. I have Red Hat 8.0, kernel 2.4.18 and a dc10+ card. Could someone detail what I need to do to get the card working. Here is the slightly edited dmesg output: Linux version 2.4.18-14 (bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000002000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 32MB LOWMEM available. On node 0 totalpages: 8192 zone(0): 4096 pages. zone(1): 4096 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.18-14 root=LABEL=/ Initializing CPU#0 Detected 334.103 MHz processor. i2c: initialized Linux video capture interface: v1.00 Zoran ZR36060 + ZR36057/67 MJPEG board driver version 0.7 PCI: Found IRQ 11 for device 00:0a.0 MJPEG[0]: Zoran ZR36067 (rev 2) irq: 11, memory: 0xefffe000 MJPEG[0]: subsystem vendor=0x1031 id=0x7efe MJPEG[0]: Changing PCI latency from 64 to 32. MJPEG[0]: Initializing i2c bus... adv7176_attach: adv7176 rev. 1 at 0x56 DC10plus[0] card detected DC10plus[0]: Zoran ZR36060 (rev 1) MJPEG: 1 card(s) found MJPEG: using 2 V4L buffers of size 128 KB Enabling Natoma workaround. DC10plus[0]: Initializing card[0], zr=c28b1080 DC10plus[0]: Testing interrupts... DC10plus[0]: interrupts received: GIRQ1:60 queue_state=0/0/0/0 DC10plus[0]: procfs entry /proc/zoran0 allocated. data=c28b1080 DC10plus[0]: kmalloc for V4L bufs failed DC10plus[0]: zoran_open: v4l_fbuffer_alloc failed DC10plus[0]: kmalloc for V4L bufs failed DC10plus[0]: zoran_open: v4l_fbuffer_alloc failed Here is the modules.conf: alias parport_lowlevel parport_pc alias eth0 3c59x alias char-major-81 zr36067 options zr36067 default_norm=0 lock_norm=0 pass_through=1 pre-install zr36067 (modprobe saa7110;modprobe adv7175) alias usb-controller usb-uhci I can pay for the help. This is a very urgent need. I am on http://www.scriptlance.com as computerplanet. Thanks, r.b.