On Wed, 11 Jun 2003, ashutosh srivastava wrote: > Hi, > My system is : > 1. Red Hat 9 > 2. kernel 2.4.20-8 > 3. GCC 3.2.2 > 4. xawtv 3.89 from http://bytesex.org > 5. ADCom TV Capture Card based on SAA7130HL > > 'Make' runs succesfully in saa7134-0.2.8 > (snapshot-20030605) directory. > However on 'modprobe saa7134' -> "CAN'T LOCATE > SAA7134" error is given and thus both v4l-conf & > xawtv complains of missing /dev/video0 (which actually > exists). > On looking into /usr/src/linux/drivers/media/video > directory, there is no saa7134 file. > > ------------ I R O N Y ----------------------------- > > However the same card is working great in : > 1. Mandrake 9.1 > 2. kernel 2.4.21-0.13mdk > 3. xawtv 3.85 > 4. no patch or driver applied > 5. TV, S-Video, Composite1, Composite2 all are working > along with full colour and video > 6. only "modprobe saa7134 card=3" (present in original > > /usr/src/linux/drivers/media/video directory) and > few additions in /etc/modules.conf is needed before > running v4l-conf & xawtv. > 7. Additions done in /etc/modules.conf > alias char-major-81 videodev > alias char-major-81-0 saa7134 > > options saa7134 tuner=37 > options tuner type=37 > > Please help me as even after trying various > permutations and combinations, I have been unable to > use the above TV Capture Card in Red Hat 9. > > Best Wishes. > ash. I have an AverTVstereo card in an RH 8 box with PentIV 1.6 Ghtz 512 meg mem. Works very well for video from USA Cox Cable system. I tried installing RH 9 but it floundered on the tvcard so I just went back to RH 8. I will try a bit later w/RH 9 and wonder if RH has any fixes for it. I use the xawtv driver. Warren