On Sun, 2003-06-01 at 16:40, Gunther Mayer wrote: > Ryan Voots wrote: > > i'm using the bttv driver for my hauppage (card=10 i believe) and i > > can't seem to get stereo sound, i'm not sure why but i can only get out > > mono from my card, i'm loading the bttv driver as a module, according to > > dmesg i'm using 0.7.106, just patched my kernel a few minutes ago and > > recompiled. i could never get it to go out of mono in windows either, > > Bttv doesn't detect a msp34xx chip; look at your card if there is some. > If not, your card is non-stereo. > > To make sure there is no software problem, send output of > bttv-0.7.106/tools/eeprom -x > > > my brother has the same card, and his does stereo, i'm wondering if its > > Compare "dmesg" from the other card to see (and run eeprom -x on that card). > > > something else about my computer. sorry if my email is a bit long for a > > simple problem > > > > heres the sections from the kernel logs when it loads > > > > bttv: driver version 0.7.106 loaded > > bttv: using 4 buffers with 2080k (8320k total) for capture > > bttv: Host bridge is Silicon Integrated Systems [SiS] 735 Host > > bttv: Bt8xx card found (0). > > bttv0: Bt878 (rev 17) at 00:0b.0, irq: 12, latency: 64, mmio: 0xcddfe000 > > bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb > > bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected] > > bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] > > i2c-dev.o: Registered 'bt848 #0' as minor 0 > > i2c-core.o: adapter bt848 #0 registered as adapter 0. > > bttv0: Hauppauge eeprom: model=44801, tuner=Temic 4036FY5 (8), radio=no > > bttv0: using tuner=8 > > bttv0: i2c: checking for MSP34xx @ 0x80... not found > > > > > -- > video4linux-list mailing list > Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/video4linux-list > after looking at the card it looks like it doesn't support stereo audio in anyway, no chip for it, just the tuner and the 878 chip, i may decide to get a better one sometime soon, any recommendations? (i can at least get audio out of both speakers by using the mic input for the jumper cable rather than the line in)
Attachment:
signature.asc
Description: This is a digitally signed message part