I'm in the US so I have NTSC. The bttv driver is chosing PAL.
Obviously, the video is very poor. Suggestions? Thank you.
Linux video capture interface: v1.00
bttv: driver version 0.7.106 loaded
bttv: using 32 buffers with 2080k (66560k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x]
bttv: Host bridge is VIA Technologies, Inc. VT82C596 Power Management
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:12.0, irq: 18, latency: 32, mmio: 0xdf101000
bttv0: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003
bttv0: using: BT878(ATI TV-Wonder VE) [card=64,autodetected]
i2c-core.o: client [EEPROM chip] registered to adapter [bt848 #0](pos. 0).
i2c-core.o: adapter bt848 #0 registered as adapter 1.
bttv0: using tuner=19
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
i2c-core.o: driver i2c TV tuner driver registered.
tuner: ignoring SMBus Via Pro adapter at 5000 i2c adapter [id=0x40002]
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc0
tuner: type set to 19 (Temic PAL* auto (4006 FN5))
i2c-core.o: client [Temic PAL* auto (4006 FN5)] registered to adapter
[bt848 #0](pos. 1).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0