I have the same board and installed the ATI.2 files from GATOS. I was immediately able to use xawtv. (I did not install km as I was not then interested in video capture, although that is on my projects list.) However, I also installed ATI.2 on another machine with an older All-In-Wonder based on an older chip and it didn't seem to work. Just on a whim, I copied my .xawtv file from my Radeon 7500 machine (which worked) to the other machine and it immediately worked just fine. In case that is your problem, I have attached my .xawtv file here as well. Hope this helps. Lynn -----Original Message----- From: Mauricio Henriquez [mailto:buho-1@xxxxxxxxxxxxxx] Sent: Thu 5/22/2003 3:10 PM To: video4linux-list@xxxxxxxxxx Cc: Subject: ATI AIW Radeo 7500 V4L Please Help Hi: My name is Mauricio and I write from Chili. Recently I install RH8 and GATOS drivers for ATI all-in-wonder Radeon 7500 and the km modules for have the ati device as video4linux standar device. Now I can start xawtv with the /dev/video0 device (previously the xawtv software says "/dev/video0" device not found..bla,bla,bla) but I can't see any chanel (my country use US NTSC cable), I can hear sound from the chanels but I can't see nathing (all video noise), I try changed the properties and all but nathing. Please anyone can help me about how configure correctly the ati for v4l standar?? And when I run for the first time my RH8 system I have 3D Hardware aceleration working perfectly (I tested with Tux-Racer, but when I finish to install the gatos driver I don't have 3D hardware aceleration (Tux-Racer is too slow). Any idea??? Thanks -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
Attachment:
.xawtv
Description: .xawtv
