Hi, after applying the april saa7134 v0.2.8 , I obtained (after many modifications of /etc/modules.conf and starting v4l-conf) a (first) tv-picture and sound for some values of card=# (card=3 was one of them) under the tuner=29 value (as suggested by workin DScaler in Win98) on my Manli MTV 002 card. BUT for Composite2 input, for TV input (input=0 in mplayer, tvtime) I obtained only a sound and a possibility to tune the tuner (with constant reply "No signal" in tvtime showing the BLUE screen with this not-very-friendly sign :-) the mplayer has the same behaviour. Hence, now I can run tvtime with input 0 to tune the channel and switch by pressing "I" several (3) times to Composite2 to see also a (moving and working) picture. Or to start mplayer to see the same working picture+sound, but with no possiblity to input the channel (by a simple(=one) command) The other sources (Composite1 and S-video works fine :-) there is a second BUT: I must not start xawtv! since it results only by the green screen for both tvtime and mplayer for all sources. The xawtv itself replies with sound and possibility to tune, but the picture is black (none) for all sources. The only solution for this is restart the computer :-/ Do you have any suggestion, which parameters I should change (in saa7134-cards.c ? or to try different tuner=#) ? What additionaly does xavtw initialize which results in non-working mplayer/tvtime ? (In order to re-initialize it after a non-successful start/run of xawtv)? Thanks a lot! Have a nice may :-) Honza Eisner