Hi Robert, I had also PCTV Pro with similar problem. It was inserted in i815 MB (MSI) and it worked only when the 3com 3c905 was in a PCI slot too. Once I removed the 3com MSP34xx was not detected. When I inserted another model of net card (Realtek 8139) it didn't work either. Then I moved the PCTV Pro into i845 MB (MSI too) and it worked only when I had enabled on-board audio chip and only after power on. When I rebooted, MSP34xx was not detected again. When I disabled on-board audio (as I bought Audigy 2) it ceased to work at all. That was enough for my patience - I need to work and not to fiddle with a bloody TV card. I bought FlyVideo 3000FM and all my problems are gone. Well, not all as I cannot switch between languages when there is dual language broadcasting. But this problem is being solved by Gerd Knorr, the author of saa7134 drivers. I have better picture than with PCTV Pro and the card is about half price of Pinnacle. On the other hand, I lent the Pinnacle to my friend and the card works perfectly in his machine - he has some Soltek or other MB. Well, it's up to you what to do but I believe this info helps you. Let me know then. Best regards, Ing. Jozef Sakalos On Thursday 08 May 2003 22:23, Robert Kulagowski wrote: > Anyone care to weigh-in on what may be happening here? > > > -----Original Message----- > > From: video4linux-list-admin@xxxxxxxxxx > > [mailto:video4linux-list-admin@xxxxxxxxxx]On Behalf Of Robert > > Kulagowski > > Sent: Friday, April 25, 2003 9:09 PM > > To: video4linux-list@xxxxxxxxxx > > Subject: Pinnacle PCTV Pro MSP34xx chip not being detected when > > installed in ServerWorks GC-SL motherboard > > > > > > > > -----BEGIN PGP SIGNED MESSAGE----- > > Hash: SHA1 > > > > This is a Dell PowerEdge 600SC with the ServerWorks GC-SL > > chipset. The same card installed in a 440BX motherboard is > > detected as having stereo capability. > > > > Linux video capture interface: v1.00 > > i2c-core.o: i2c core module version 2.7.0 (20021208) > > i2c-algo-bit.o: i2c bit algorithm module version 2.7.0 > > (20021208) bttv: driver version 0.7.106 loaded > > bttv: using 8 buffers with 2080k (16640k total) for capture > > bttv: Host bridge is ServerWorks GCNB-LE Host Bridge > > bttv: Host bridge is ServerWorks GCNB-LE Host Bridge (#2) > > bttv: Host bridge is ServerWorks CSB6 South Bridge > > bttv: Bt8xx card found (0). > > bttv0: Bt878 (rev 17) at 00:04.0, irq: 20, latency: 32, mmio: > > 0xfeb03000 > > bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is > > 11bd:0012 > > bttv0: using: BT878(Pinnacle PCTV Studio/Ra) > > [card=39,autodetected] bttv0: i2c: checking for MSP34xx @ > > 0x80... not found > > bttv0: miro: id=18 tuner=2 radio=fmtuner stereo=no > > bttv0: using tuner=2 > > bttv0: i2c: checking for MSP34xx @ 0x80... not found > > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > > tvaudio: TV audio decoder + audio/video mux driver > > tvaudio: known chips: > > tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda > >8425,pi c16c54 (PV951) > > tuner: probing bt848 #0 i2c adapter [id=0x10005] > > tuner: chip found @ 0xc2 > > tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and > > compatibles)) bttv0: PLL: 28636363 => 35468950 .. ok > > bttv0: registered device video0 > > bttv0: registered device vbi0 > > bttv0: registered device radio0 > > > > -----BEGIN PGP SIGNATURE----- > > Version: PGPfreeware 7.0.3 for non-commercial use > > <http://www.pgp.com> > > > > iQA/AwUBPqnqTvc1NpCTlP0JEQKd1ACgy2W2sWTCVCpncUCBsh3XSnOgWhcAoLu > >/ JNxq9Q4DD6htCnMPnLUnpOwQ > > =zl1k > > -----END PGP SIGNATURE----- > > > > > > > > -- > > video4linux-list mailing list > > Unsubscribe > > mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe > https://listman.redhat.com/mailman/listinfo/video4linux-list > > > > -- > video4linux-list mailing list > Unsubscribe > mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe > https://listman.redhat.com/mailman/listinfo/video4linux-list