Thanks so much! This was just the solution. I knew the BTTV faq looked light, but I didn't realize it was -this- light ;) Also, thanks for the link to TVTime in general... this looks like a good, solid, well documented piece of software - I think I will try it out. Josh ----- Original Message ----- From: "Billy Biggs" <vektor@xxxxxxxxxxxx> To: <video4linux-list@xxxxxxxxxx> Sent: Wednesday, April 23, 2003 1:23 PM Subject: Re: Channels off by 110 > You are all experiencing this problem: > > http://tvtime.sourceforge.net/hardware.html#tvwonder > > See that page for details on how to fix it (use tuner type=2). > > The Phillips tuner used on these cards is detected as a PAL tuner, > even though you have the NTSC version. I would very much like to > investigate this further and find a workaround in the tuner driver, > since very very many North American users are affected by it. We have > this bug open to track it. > > http://sourceforge.net/tracker/index.php?func=detail&aid=711428&group_id=643 01&atid=506987 > > Hope that helps, > -Billy > > Richards Jr, Edward C. (RicharEC@xxxxxxxxxx): > > > > > I have had the same problem with an ATI TV Wonder VE card on both Xandros 1.0 and Mandrake 9.1 using both MoTV and xawtv viewers. I recently installed Mandrake 9.1 on one of my machines which installed Zapping as the viewer with the same result, however, Zapping allows you to change the fine tuning settings and save them with the channel information, so if you do it once and save it, it works pretty well. However, it would be good to actually get it to work correctly rather than work around. > > > > Ed Richards > > > > > > -----Original Message----- > > From: Adam C. Emerson [mailto:acemerson@xxxxxxxxxxx] > > Sent: Wednesday, April 23, 2003 2:15 PM > > To: video4linux-list@xxxxxxxxxx > > Subject: Re: Channels off by 110 > > > > > > On Wed, Apr 23, 2003 at 12:00:38PM -0700, Josh Matthews wrote: > > > Interesting.. > > > > > > This is very similar to the behavior I'm experiencing with my new KWorld > > > TV878RF, as I posted yesterday. You wouldn't happen to be running Red Hat 9 > > > would you? Last night as I was playing with modprobe options for bttv, I > > > was beginning to wonder if my channel mapping might not be off in the > > > version of xawtv that came packaged with RH 9. > > > > Nope, I'm running Debian Sid. So far, I've gotten it working by > > stuffing a "fine = 110" in the [defaults] section, bit it still puzzles > > me somewhat. > > > > > > > > -- > > video4linux-list mailing list > > Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe > > https://listman.redhat.com/mailman/listinfo/video4linux-list > > > > > > This email, including any attached files, may contain confidential and privileged information. Any review, use, distribution or disclosure of included information by unintended recipients is strictly prohibited. If you are not a named recipient or authorized to receive and / or act on information sent to a named recipient, or have reason to believe you are not or should not be one of the named recipients, please notify sender accordingly by reply email and delete all copies of this message prior to forwarding, copying or otherwise reproducing this message or attachments thereto. For information regarding the export control status of items discussed in this document, please refer to the project control list. Thank you. > > > > > > > > > > This email, including any attached files, may contain confidential and privileged information. Any review, use, distribution or disclosure of included information by unintended recipients is strictly prohibited. If you are not a named recipient or authorized to receive and / or act on information sent to a named recipient, or have reason to believe you are not or should not be one of the named recipients, please notify sender accordingly by reply email and delete all copies of this message prior to forwarding, copying or otherwise reproducing this message or attachments thereto. For information regarding the export control status of items discussed in this document, please refer to the project control list. Thank you. > > > > > > > > > > -- > > video4linux-list mailing list > > Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe > > https://listman.redhat.com/mailman/listinfo/video4linux-list > > > > -- > video4linux-list mailing list > Unsubscribe mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe > https://listman.redhat.com/mailman/listinfo/video4linux-list
