Hi, I cant get sound on my Pinnacle PCTV with the new bttv 0.9 drivers. With the 0.7 drivers it works without problems. Dmesg info: i2c-core.o: driver i2c tda9887 driver registered. bttv: driver version 0.9.9 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Host bridge is VIA Technologies, Inc. VT8367 [KT266] bttv: Bt8xx card found (0). PCI: Found IRQ 10 for device 00:0d.0 PCI: Sharing IRQ 10 with 00:0d.1 bttv0: Bt878 (rev 17) at 00:0d.0, irq: 10, latency: 32, mmio: 0xed001000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected] tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc0 i2c-core.o: client [(tuner unset)] registered to adapter [bt848 #0](pos. 0). tda9887: probing bt848 #0 i2c adapter [id=0x10005] tda9887: chip found @ 0x86 i2c-core.o: client [tda9887] registered to adapter [bt848 #0](pos. 1). i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no bttv0: using tuner=33 tuner: type set to 33 (MT2032 universal) MT2032: Companycode=4d54 Part=04 Revision=04 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok Any ideas? Regards, Bjorn