RE: No btaudio sound (Was: RE: desperation: suddenly no svideo on Pinnacle PCTV Pro)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



 
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> > [root@masterbackend mythtv]# modprobe msp3400
> > [root@masterbackend mythtv]# lsmod
> > Module                  Size  Used by    Not tainted
> > msp3400                17804   0  (unused)
> 
> Bad.  "Used" goes up to "1" if the module finds a chip ...
> 
> I've tested today how my Pinnacle behaves: It doesn't give sound
> via btaudio too, so I suspect it might not work at all, even with
> msp3400 being detected properly ...

Hrmm.

Pinnacle PCTV Pro in a PIII/733 with a 440BX motherboard:

[root@pvr mythtv]# dmesg|grep bttv
bttv: driver version 0.7.96 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge
bttv: Host bridge needs ETBF enabled.
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:0b.0, irq: 10, latency: 32, mmio:
0xd7000000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is
11bd:0012
bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected]
bttv0: enabling ETBF (430FX/VP3 compatibilty)
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: miro: id=18 tuner=2 radio=fmtuner stereo=yes
bttv0: using tuner=2
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c attach [client=MSP3451G-A2,ok]
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c attach [client=Philips NTSC (FI1236 and compati,ok]
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: i2c attach [client=EEPROM chip,ok]
bttv0: i2c attach [client=EEPROM chip,ok]
bttv0: i2c attach [client=EEPROM chip,ok]
bttv0: i2c attach [client=EEPROM chip,ok]
bttv0: PLL: 28636363 => 35468950 ... ok

_Found_ the MSP34xx

2nd card, on a P4 2.4Ghz with Server Works Chipset:

[mythtv@masterbackend mythtv]$ dmesg|grep bttv
bttv: driver version 0.7.100 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is ServerWorks GCNB-LE Host Bridge
bttv: Host bridge is ServerWorks GCNB-LE Host Bridge (#2)
bttv: Host bridge is ServerWorks CSB6 South Bridge
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:07.0, irq: 27, latency: 32, mmio:
0xfeb01000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is
11bd:0012
bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=18 tuner=2 radio=fmtuner stereo=no
bttv0: using tuner=2
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c attach [client=Philips NTSC (FI1236,FM1236 and ,ok]
bttv0: PLL: 28636363 => 35468950 ... ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: switching off

Not found.  Could there be two different board revs at work here? 
I'll have to pull the cards and look.  I'll see if btaudio works on
the board where the MSP34xx was found.

Any data I can provide to assist?

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com>

iQA/AwUBPoOCWPc1NpCTlP0JEQKL3gCfR3zeBmN2LJVuA2i6CECxaTMgtfoAoPFA
aiu4+reUXnPYmsxK+eNICAiu
=/KxY
-----END PGP SIGNATURE-----





[Index of Archives]     [Linux DVB]     [Video Disk Recorder]     [Asterisk]     [Photo]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Free Photo Albums]     [Fedora Users]     [Fedora Women]     [ALSA Users]     [ALSA Devel]     [Linux USB]

Powered by Linux