Hi all, I'm trying to get my terratec 400 working, but until now without success. xawtv displays a black screen and there's no sound, although scantv does find tv channels (most listed as ???, but RTL4 is identified on channel E12). My system runs 2.4.20 with the v4l2 patches, the saa7134 driver version 0.2.5. My videocard is an ATI 9100, I'm running X 4.2.99 from cvs. After loading the module, dmesg shows me the following: saa7130/34: v4l2 driver version 0.2.5 loaded saa7134[0]: found at 00:09.0, rev: 1, irq: 11, latency: 64, mmio: 0xdffff800 saa7134[0]: subsystem: 153b:1142, board: Terratec Cinergy 400 TV [card=8,insmod option] i2c-core.o: adapter saa7134[0] registered as adapter 1. saa7134[0]: i2c eeprom 00: 3b 15 42 11 ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff i2c-core.o: driver i2c TV tuner driver registered. tuner: ignoring ISA main adapter i2c adapter [id=0x50000] tuner: probing saa7134[0] i2c adapter [id=0x90000] tuner: chip found @ 0xc0 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) i2c-core.o: client [Philips PAL_BG (FI1216 and compa] registered to adapter [saa7134[0]](pos. 0). saa7134[0]: registered device video0 [v4l2] saa7134[0]: registered device vbi0 And some time later: tuner: TV freq (0.00) out of range (44-958) xawtv -hwscan shows: This is xawtv-3.85, running on Linux/i686 (2.4.20-duckman) looking for available devices port 61-61 [ -xvport 61 ] type : Xvideo, video overlay name : video4linux port 62-62 type : Xvideo, image scaler name : ATI Radeon Video Overlay /dev/video0: OK [ -device /dev/video0 ] type : v4l2 name : Terratec Cinergy 400 TV flags: overlay capture tuner So the card seems to be detected correctly, but why is there no tv? Any help is welcome. Best regards, Wouter